BISupply No Dig 6x6 Post Anchor Square Bracket 1pk - Bolt Down Post Base Wood Post Ground Anchor Fence, Mailbox, Deck

Product Information

This 6x6 post base requires the following fasteners for installation: (1) – 5/8” concrete anchor, (12) - 16d x 3-1/2” Common Nails or (2) – ½” Machine Bolts (Use nails OR bolts. DO NOT install nails and bolts together!) x 6″ Post Surround covers 20″ on all sides. 6″ x 6″ is an inside measurement, not the finished exterior. See our Anchoring, Fastening and Restoration Systems for Concrete and Masonry catalog for retrofit anchor options, such as Titen HD®, Stainless-Steel Titen HD or SET-3G™.

With over 40 Years experience in the fencing industry the name of Oakdale Fencing Ltd is synonymous with quality, value and service.The slot in the base enables flexibility around the anchor bolt, making precise post placement easier

Not all galvanized is created equal, pre-galvanized steel does not perform as well as HDG. Galvanizing after production ensures all areas of the steel is uniformly coated with zinc. The same process used for national highway guardrails, an area subjected to some of the harshest environmental conditions. Keep collections to yourself or inspire other shoppers! Keep in mind that anyone can view public collections—they may also appear in recommendations and other places. OWT hardware is not only attractive but it is also structural. We could manufacture our products for a lower cost but our goal is to make our products perform above industry standards.Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).

Place the base, cut washer(s) or load transfer plate(s) and nut(s) on the anchor bolt(s). Make any necessary adjustments to post placement and tighten the nut securely on the anchor bolt.

Uplift loads have been increased for earthquake or wind loading with no further increase allowed. Reduce where other loads govern. Pressure treated 6×6 post. This 6×6 timber post is suitable for use in agricultural and landscaping. As with all Oakdale Fencing products, the timber is sustainably sourced and of very high quality. The top of the timber post has a four way weather top. This tanalised 6×6 post has been pressure treated as well as being naturally robust and durable. The Trim Ring is specifically designed to work with the MSI Post Surround system. This trim allows for your post to continue up without stone, it caps your last row of stone. It comes in two pieces to fit seamlessly around your post. Dimensions: 12" x 12" x 3" Accessories available to finish your project; Trim Ring Stones, Pyramid Caps, both available in brown or gray. Shims are required for double 2x (1 shim) and triple 2x (2 shims) installations as shown in the illustration. Additional fastening of shim to beam is not required.

ABU products may be installed with either bolts or nails (not both) to achieve table loads. ABU88Z, ABU88RZ, ABU1010Z, ABU1010RZ, and ABU1212Z/RZ may be installed with (8) 1/4" x 3" Strong-Drive® SDS Heavy-Duty Connector screws (sold separately) for the same table load. stand-off design meets code requirements for structural posts installed in basements or exposed to weather or water splash You don't have permission to access "http://www.lowes.com/pd/Simpson-Strong-Tie-Steel-G185-Post-Base-Common-6-in-Actual-5-in/3044772" on this server.Available in the following matching color profiles: Charleston, Huntington, Hunter, Giles, Aspen, Horizon, Meridian, Cedar Branch, Reveal, Monroe, Misty and most other P-Series profiles. The ABU66Z provides a 1” standoff to get your 6x6 post 1” off the ground. Not only will your project be code compliant, but it will keep your post end from sitting in standing water to prevent unwanted rotting and damage.