The Leather Clinic Leather Finish Sealant | Scratch Resistant, Waterproof Top Coat for Furniture, Sofas, Car Seats & More (Gloss, 100ml)

Product Information

Once conditioned, the leather can be sealed. This serves a few purposes. First, it provides a protective layer that will protect the leather underneath. Second, it will protect the user of any dyed leather from having any of the dye rub off onto their skin or clothes. Some common finishes include carnauba wax and resolene. Excellent! The leather has been cleaned, dyed, and finished, you’re all done! After the finish has dried you can clean up. The grain and corium junction is where the tight, outer layer of the leather blends into the looser fibers of the corium. This junction is a mix of the very desirable grain layer, and the more fibrous and looser fibers of the corium layer. Leather Hide – Corium

Great! Let’s start here. The leather hide is the skin removed from an animal. Since it is a natural substance, it has unique characteristics and qualities that help it serve a purpose for the animal it was a part of. NOTE: It is fine to apply another coat of Binder on top of the Flexifil if necessary. Even if you apply colour and think it could be re-filled, it is ok to apply Flexifil on top of the colour. This helps to achieve a smooth finish. The leather treatment will brighten or darken the leather's original color. If the leather is dyed, it will also affect the richness of the pigments employed. The natural surface of split grain leather is not as dense, tight, and useful as full grain and top grain. Thus, it is often used in finishes of leathers that are colored, embossed, and the surface altered in some significant way. This allows it to offer some of the helpful qualities of a leather material, while having a visually pleasing and often-functional surface beneficial for leather products. Bonded Leather (Reconstituted Leather)Leather can be produced from the skin of any animal. Throughout history many leathers have been made across times, regions, and through different methods. Since manually applying dye via a brush or dauber requires repetitive accuracy, pulling is preferred as a single pull can have the whole item covered in just the same way, similar to dipping. Dipping Semi-Aniline Finish Leather – Semi-aniline finish leather is aniline dyed or stained using a small quantity of pigment so that the natural characteristics of the hide is visible. This is first saturated in dyes and later on given light coating of dyes and pigments on the surface. The treatment of semi-transparent stains provides protection against fading but do not completely obscure the surface. This type of leather would be considered next to aniline leather. The sun is a natural leather dye. When exposed to the UV rays from the sun, unfinished, vegetable tanned leather will darken over time. It does take time, though some leather crafters use this method to naturally change the colors of leather to a darker color. Paint as a Leather Dye

Finishing and Finishes are very common terms in leatherwork. Every type of project needs to be finished in one way or another for that added professional touch and feel. But what’s finishing and finishes and what are the differences between them? What’s Leather Finishing?The major characteristic of using leather finishes is that they only come in at the final stages of the product making process. Types of Finishes Given to Leather B urnishing Leather is prepared for dye by cleaning it first with a delgazer. The deglazer removes surface finishes and any chemicals that might be on the leather fibers. Once cleaned, the leather is then ready for application of the leather dye. Can you dye leather with food coloring? Aniline leather, commonly known as "bare leather," is one of the most basic leather treatments available. The double bend cut of a leather hide is from the area ranging from the spine towards the belly, towards the middle of the hide. This is some of the best leather available in a hide, the prime sections generally towards the hind side before the butt. It is best used for across a number of leather product applications. Butt Leather Cut

Adequately rub or run your preferred burnishing tool over the grain surface of the leather to and fro until you achieve a glass-like glossy finish.The wax is usually put on by hand, then buffed to a shine. The end result is a soft-feeling, shiny surface that wears well and looks great. Leather Resolene/Acrylic

The flesh is the layer of the hide that consists mainly of muscle and fatty tissues. It is not very valuable for end leather uses. As such, leather is usually split to remove the layers above it, yielding useable material of different grades and qualities for the production of leather goods.Leather Finishing is a leatherwork term that is used to describe all the activities the leather item being made goes through with particular attention to the step by step processes that determines the quality of the overall appearance of the leatherwork. A. Yes, once the finish has completely cured (seven days) you can continue to clean and protect the leather as normal. We recommend our Leather Care Kit for this, which provides powerful cleaning and protection for all leather items.