Versatile use. The great thing about triple square bits is that they have a variety of implementations. They work quite well when used with torque wrenches, breaker bars, and ratchets. It is important to note that they should not be used with impact tools, however. The triple-square, also known as XZN, is a type of screw drive with 12 equally spaced protrusions, each ending in a 90° internal angle. The name derives from overlaying three equal squares to form such a pattern with 12 right-angled protrusions (a 12-pointed star). In other words, three Robertson squares are superimposed at a successive 30° rotation. The design is similar to that of the double-square—in both cases, the idea being that it resembles a square (Robertson) but can be engaged at more frequent angles by the driver bit. These screws can be driven with standard Robertson bits. Tamper resistance. Initially, Torx screws were highly tamper-resistant because there were not screwdrivers or drive systems widely available. Since they have become more common, there are variants that are tamper-resistant. BRISKODA is owned and operated by Summit 360 Ltd, registered in England & Wales, company number 05710517. Optimum torque. Anyone who has worked on a vehicle knows how difficult it can be to remove a seized nut or bolt. Triple Square is great for high-torque applications. For automotive needs, that means things like drive train components and cylinder head bolts which can be tougher to remove than other components.

Capri Tools 1/2-in Drive 14Mm Triple Square Bit Driver Socket

That’s a hard question to answer because of the different applications. If we were grading them simply on their qualities, Torx would win based on versatility alone. Torx bits can be used in automotive-like triple squares, but they have so many other applications as well. Where are they used? Triple square bits are typically used for automotive components. They also tend to be found in a lot of European-made vehicles. German manufacturers Audi, Mercedes, BMW, Volkswagen, and Porsche all favor the triple square design. If you bought the car used, make sure the doofus before you didn't try to use an Allen bit or a torx bit and mess up the bolt. I've seen that plenty of times. When it comes to the automotive world, they are very similar. Both are recommended for high-torque scenarios. Both are built to be durable and stand up to the constant pounding that a lot of torque can deliver to a part.

All content is viewed and used at your own risk. We do not warrant the accuracy or reliability of any of the information. To the novice, drill bits all seem the same. The simple fact of the matter, however, is that there are so many different options that it can become confusing. Take Triple Square and Torx screws, for instance. They may seem the same, but there are important differences. The 12-pointed internal star shape superficially resembles the "double hex" fastener head, but differs subtly in that the points are shaped to an internal angle of 90° (derived from a square), rather than the 120° internal angle of a hexagon. In practice, drivers for the fasteners may or may not interchange, but should be examined carefully for proper fit before application of force. A hex key should not be used where a key of square cross-section is the correct fit.

Triple Square Vs. Torx Drill Bits: What Are The Major Triple Square Vs. Torx Drill Bits: What Are The Major

A construction favorite. Torx bits have become particularly popular within the construction industry. Due to its cam-out resistance and tamper resistance, it has become a more consistent, better choice than most traditional Phillips and flathead screws. Triple-square drive fasteners have been used in high-torque applications, such as cylinder head bolts and drive train components. The fasteners involved have heads that are hardened and tempered to withstand the driving torque without destroying the star points. They are commonly found on German vehicles such as BMW, Opel, Mercedes, Porsche and those from the Volkswagen Group ( Audi, Seat, Skoda, and Volkswagen). They're known by the Americans as "Triple Square" or VAG as ZXN and are used as they can handle higher torque before camming out. The views expressed herein are those of the individual contributors and not necessarily those of BRISKODA or SKODA. Resistance to camming. One of the biggest benefits of the Torx bits is that they resist cam-out better than a traditional Phillips or flathead would. Cam-out is where the screwdriver slips out while turning the head. Repeated cam-out can damage the screw head, making it difficult to use going forward.Moreover, there are the construction applications of Torx. You can conceivably have an entire toolkit of Torx bits and have a hundred different uses for them. With triple square, you know what they are going to be used for. anyone tell me the bolt sizes for the caliper carriers, front and rear, the 12 star torx jobs - I want to buy some before I attempt to change the discs(all round) on my pre fl 140 beast, I think hex heads will be easier to handle than the 12 stars, especially on the rears!! For general automotive and other uses, it’s Torx. But the versatility of Torx is too hard to ignore. Even when it comes to automotive needs, Torx is simply available in more types of vehicles. That means being able to get a wider array of bits and tools to handle the job.