Makita DMR110 Li-ion DAB/DAB+ Job Site Radio - Batteries and Charger Not Included

Product Information

Press and hold the desired Preset button until the preset number shown on the display, for example, "P2 Saved". The station is then stored in the selected Preset button. If your radio fails to work correctly, or some digits on the display are missing or incomplete, carry out the following procedure. i have a makita ip64, i have to connect via bluetooth from a moblie phone to get the radio station working. my question is the volume only goes to 30, can this be increased as we are working in a factory.

Press the Advanced setting button and rotate the Volume/Tuning Control/Select knob until "DRC Value" shown on the display. Then press the Volume/Tuning Control/Select knob to enter the setting. The display will show the current DRC value. Press the Advanced setting button and rotate the Volume/Tuning Control/Select knob until "Station List" is flashing on the screen. Press the Volume/Tuning Control/Select knob to enter the list of the stations. Repeatedly press and release the Band button until "AU1" or "AU2" is displayed, then AUX function is activated. Stations stored in the preset memories can be overwritten by following the procedures described above.Rotate the Volume/Tuning Control/Select knob to choose your desired language. Press the Volume/ Tuning Control/Select knob to confirm your setting. Rotate the Volume/Tuning Control/Select knob to scroll through the list of available stations. Press the knob to select the station. For preparation of the item being shipped, consulting an expert for hazardous material is required. Please also observe possibly more detailed national regulations. Keep rotating the Volume/Tuning Control/Select knob until desired frequency is shown on the display.

To allow the radio to find the available stations, it is recommended to carry out a full scan of the entire DAB Band III frequencies. This radio has three tuning methods- Scan tuning, Manual tuning and Memory presets recall. Selecting a station - DABYour radio will perform a full scan of the DAB frequencies. As new stations are found, the station counter on the left side in the display will increase and stations will be added to the list. Rotate the Volume/Tuning Control/Select knob to choose "Yes". Press the Volume/Tuning Control/ Select knob to confirm the setting and a full reset will be performed. Rotate the Volume/Tuning Control/Select knob until "Language" shown on the display. Press the Volume/ Tuning Control/Select knob to enter the setting.