Osciloscopio fnirsi 1014d - generador de señal DDS de osciloscopio digital en dos en uno, ancho de banda de 100 MHz de 2 canales 1gsa / s tasa de muestreo

Product Information

Even if it has bandwidth of 30MHz, it’s still a decent tool in my opinion for people who can’t afford anything better. Gear selection: the output voltage of inverter is similar to that of household electricity, with peak peak voltage above 500V, the highest measurement of 40V in 1X, 400V in 10x and 4000V in 100x gear.

Digital Oscilloscope / Signal Generator FNIRSI 1014D Digital Oscilloscope / Signal Generator FNIRSI 1014D

If you want to do some more with electronics, then soon you will be mislead by the fnirsi thing and you will probably be wasting hours of your time before you even realize it’s the fnirsi that gives you a distorted view of your signals, and then you’re still guessing what is really happening, and that is not what you want to spend your time on while learning electronics. The trouble with this thing is that you can’t trust it because it hides to much and there is too much you can’t see, and that is why it’s bad. If a reviewer gives this thing the thumbs up, then it’s time to add that reviewer to your blacklist.However, we aren’t sure that the test setup — on a solderless breadboard — wasn’t part of the problem and we’d have liked to see the test done with some known good quality probes as that can also contribute to bad readings even if the scope’s circuitry is up to par. The recreation of the scope project is setup to create a binary in the emulator project directory and start the emulator for testing. Answer: please check whether the power cord is connected to the oscilloscope and whether the socket is powered.

FNIRSI-1014D Digital Oscilloscope 2 In 1 Dual Channel Input FNIRSI-1014D Digital Oscilloscope 2 In 1 Dual Channel Input

And if you really want to measure front-end bandwidth, you do it with a super-quick edge, rather than a generic signal generator. Firstly, the oscilloscope is set to normal normal trigger mode (auto trigger mode is default after startup).All saved captured signals will be listed on the screen, and then the selection box will be moved to the desired signal position through the navigation key. An example of this is the measurement cursors that aided by the direction keys allow us to easily move the cursors around the screen. FNIRSI-1014D is a two in one oscilloscope and signal generator launched by FNIRSI, with comprehensive functions and high practicability. Enhanced Safety Protocols: Built-in high-voltage protection up to 400V mitigates risks of equipment damage.

FNIRSI 1014D Oscilloscope - TechCorner.TV

If the signal line appears at the top, the vertical sensitivity shall be reduced, which is 100mV, 200mV, 500mv, etc. Equipped with high-efficiency One-button AUTO, and one-button waveform storage and screenshot function. This unique feature aids in determining amplitude, frequency, and phase contrast of two groups of signals, promoting a comprehensive understanding of the signal characteristics. Point is, though, with an analog bandwidth of 30 MHz or so, displaying the shortcomings should be easy. I have never seen someone actually using it for serious work for a few months and then making a review.Combined with memory compression technology, it ensures a seamless, flicker-free waveform refresh experience. Please check whether the probe and signal source are normal with multimeter 3: Why is the voltage value data 0?