SHINCO 10L/Day Energy Efficient Electric Compressor Dehumidifier for home,Carbon Air Purifier, Continuous Drainage，Auto Restart，Laundry Drying，24 Hour Timer，Damp Mould Control

Product Information

If your leaking dehumidifier is caused by the length of the drain hose, then there are 3 options to solve the problem: These pumps most commonly fail because they get jammed with debris. To fix a jammed dehumidifier pump

Dehumidifier, Shinco 10L Dehumidifier for home, Smart and Dehumidifier, Shinco 10L Dehumidifier for home, Smart and

Use this table for a summary of why your dehumidifier is leaking on the floor. Read on for more details on how to fix each cause. Reason for Dehumidifier Leak If your dehumidifier drain hose is too long, then it can cause the unit to leak. This is a problem mainly for pumpless humidifiers. The appliance has an automatic restart function in case of power failure, which ensures that the appliance will start working automatically when the power supply is restored, maintaining all previous settings. I will wait until next summer to see how things go. If it can’t handle the humidity to my satisfaction then I will simply move up to a higher capacity model. Shinco has a good product here. You just have to know your climate and the needs of the space you are trying to dehumidify. In my case 40 pints of removed moisture per day simply wasn’t enough. 4 stars nonetheless for the overall quality of the machine.My husband, who spent 60+ years in HVAC, has always had to deal with drains plugging. I do the maintenance on my dehumidifier, which I use in my workshop. In a low-temperature environment, if internal frost forms, the unit will automatically start the defrost function to protect the equipment from damage and extend the life of the machine. The internal drying function can defrost in a short time. The unit is controlled from the top touch panel which includes a small LED display. It is very intuitive and easy to use. In addition, you will be shown the current humidity level of the room by means of a numeric indicator light located on the front panel of the device.

Shinco SDO-10D 10L Dehumidifier (UK)

Clean it with a wet/dry vacuum. Disconnect the hose and suction the gunk out of the outlet. If stuff clings, use a tube cleaner brush to loosen the stuff. You can clean the hose by either suctioning, blowing out, or flushing with fresh water, but DO make sure you clean the hose, especially on units using smaller diameter hoses. Frequently you’ll find a gelatinous plug. You might want to buy a vacuum hose reducer, especially if you have a larger shop vacuum that uses larger diameter hoses. You can buy micro tools for the average 1.25 inch vacuum hose. Low temperature feature allows the system to continue to operate at temperatures as low as 41°F (5°C)

Related Article: The best small dehumidifiers 4. Bent or Kinked Drain Hose Source: terrahomeinspectionsllc The most common cause is that the unit is operating at low temperatures. Any ambient temperature below 65 degrees can cause dehumidifier coils to ice up. Many dehumidifiers have a built-in thermometer that shuts the unit down if the temperature drops too low. If your unit doesn’t have this feature, you’ll have no choice but to turn it off manually. I bought this in early September and set it up immediately in my 1400 sq. ft. fully blanket insulated basement with some A/C (4 vents) (in Iowa). We had plenty of warm days and judging by its output this dehumidifier does indeed remove 40 pints of moisture per day. My only problem was that there was obviously way more moisture to be removed as it ran constantly. It could never get the humidity down below 60%. This was not the machine’s fault. It is quiet and the humidistat and thermometer built into the display are precisely accurate. In late fall it was easily able to drop the humidity under 60% and the humidistat started it up and cut it off as needed. Impact on my electric bill was negligible. Sometimes, the problem has less to do with the hose being kinked and more to do with the fact that the drainage hose diameter is too small to handle the amount of water being discharged from your humidifier. Optional hose connection allows continuous draining in damp rooms. Divert water to basement drain or slop sink.

Shinco SDO 40 Pint Dehumidifier Shinco SDO 40 Pint Dehumidifier

You might have a jammed pump if your dehumidifier has a pump but is still leaking from an overflowing water reservoir or drainage hose.Reattach the hose and tighten it until it stops turning, being sure to keep the fitting from cross-threading. Some portable dehumidifiers do not have a standard-sized fitting and are not designed to have the hose upgraded. In this case, I recommend upgrading your dehumidifier to one that suits your humidity levels and the size of your area. If you can’t put the dehumidifier above the drain, install a condensate pump. Some units are built for this option, in which case the manufacturer should sell the right pump for your setup.

Dehumidifier | Shinco

Yes, the SHINCO 10L is perfect for that. It does an excellent job drying clothes fresh out of the washing machine. Just select the Laundry mode (continuous operation) and place the appliance close to the laundry. It is an environmentally friendly dehumidifier as it uses natural, non-toxic R290 refrigerant, which reduces energy costs and makes it more cost-effective. The SHINCO 10L dehumidifier uses compressor technology offering very good performance and significant energy savings.Ensure there’s no vertical lift in your hose. Position the dehumidifier higher or consider using a drainage pump.