PrecisionGeek M3 x 10mm Flat Knurled Thumb Screws (Set of 5) - Stainless Steel

Product Information

Screw captivation is important because in the past, screws were going missing during machine maintenance, leading to panels being improperly reattached after servicing, eventually resulting in workplace injuries when people accidentally put their hands inside machinery. For this reason, permanent fastenings (such as captive screws) are now legally required on certain equipment, such as safety covers/panels, to comply with EU law (2006/42/EC; Machine Safety Directive) and/or ISO 14583. The use of captive screws minimises the chances of a screw being lost during servicing or maintenance because usually, the captive screw remains with an assembly - e.g. a guard panel that can be lifted off another part. They can be used alongside Threaded Captive Washers to create a self-retaining fastener that cannot be fully removed from its housing.

M3 x 10mm Thumb Screws Plain Type Metric (Thread Dia. 3.0mm M3 x 10mm Thumb Screws Plain Type Metric (Thread Dia. 3.0mm

Knurled Captive Shouldered Thumb Screws are a variant of the thumb screw to DIN 464 standard but instead host a reduced thread, or unthreaded portion, below the head of the fastener. Intended for easy installation and removal by hand, these components host a large head diameter with knurling around the edge to provide an ergonomic grip. Slotted Knurled Captive Shouldered Thumb Screws are also available, designed for use with a slotted screwdriver.Yellow to orange colour depending on a proprietary process used. Will range from matt to bright finish depending on base metal. Good corrosion resistance and high tarnish resistance.

Thumb Bolts | Thumb Knob | M6 Thumb Screw | Thumb Screw Knob Thumb Bolts | Thumb Knob | M6 Thumb Screw | Thumb Screw Knob

Passivation is a process designed to remove foreign metals or impurities which may have been introduced during manufacturing/processing from the surface of stainless and corrosion resistant steels. This helps keep the protective anti-corrosion surface film intact and slows corrosion. Knurled Knobs, or Thumb Knobs easily press fit on to screws, creating a small knob for clamping or securing an application. These Thumb Screw Knobs, also known as Thumb Bolts, can be used with any length of screw. The knurled edge is easily gripped for tightening and loosening. A vital industrial component providing permanent fastening, captive screws are used when fasteners must remain attached to equipment (typically a panel) that is removed from its parent mating component. Captive screws are suitable for a range of applications, but are most often found in highly precise engineering environments..Captive screws offer higher levels of safety compared to conventional screws. Are Captive Screws easy to install? Captive screws are easy to install and are usually used with a retaining flange or a retaining washer. To install a captive screw using a retaining flange the flange must first be pressed onto the panel. The captive screw should then be screwed into the flange until the reduced diameter section is reached. For installation using a retaining washer the captive screw must firstly be fed through a hole in the panel. The washer is then screwed onto the captive screw, ensuring the reduced diameter section is reached. Captive Screws vs Regular Screws: What's the difference?Generally, captive screws have a smooth (non-threaded) shoulder/shank that has a smaller diameter than the threaded end portion. The captive screw is placed through the first panel and then on to the frame (e.g. machinery housing). The captive screw is placed through the first panel either: via a threaded hole in the panel, or - if the panel is non-threaded - via a threaded washer or retaining flange. These fasteners are required by EU law on various pieces of machinery and safety equipment – often used for fastening captive panels on industrial machines. Captive screws are designed to provide “captivation” (meaning a permanent hold). Captive screws can still be removed from their installation, but only intentionally - they are very unlikely to fall out accidentally once installed because the smooth shoulder of the captive screw remains in the panel unless specifically unscrewed.