Joined in 2023 
82 
63 About this deal
Extractors come in two sizes: 100mm/4 inches and 150mm/6 inches. In most cases, the 4-inch fan will remove moist air well enough to keep the bathroom smelling fresh and be less susceptible to mould. The only reasons you would need to consider a 6-inch extractor fan is if: Recorded at 26 dB, it’s on par with the Envirovent and louder than the Awenta, although the Awenta offers extraction of less litres per second. So, if you have a bigger bathroom or condensation is a problem, it might be better you go for a slightly louder model that has more power.
Bathroom Extractor Fans | Just Fans Ltd Bathroom Extractor Fans | Just Fans Ltd
Bathroom Extractor Fans, quiet fans for wall, ceiling and window mounting, high airflow low dB shower fan options, intermittent or constant extraction available on 230V or SELV Low voltage. The Xpelair offers two speeds depending on how powerful you’d like it to be. This will vary on bathrooms size, and will have an effect on noise level. The slower the fan needs to work, the quieter it will be. The timer can range from 30 seconds – 30 minutes, again this setting will depend on how hard you need the fan to work.The Xpelair C4HTS is a terrific extractor fan choice, coming in at 20 dB. Advertised at 16 dB we believe it’s closer to 20 dB, which is still the quietest we’ve tested. How much extraction you’ll need depends on how large your bathroom is, how well it’s already ventilated, and how many people will be using it. As extractor fans don’t use a massive amount of power, it’s best to go for the most powerful one available within your budget. You do have the option of turning it off, but if you allow moisture to build up for a long time, the fan may struggle to get rid of it all by the time you turn it on. If your fan has a humidity sensor, you may not be able to turn it off which could ruin your chance at a peaceful soak.
Extractor Fans | Ventilation | Screwfix Extractor Fans | Ventilation | Screwfix
The LED is white and reflects off the fan well, especially if you go for a glass front. The PIR motion sensor and Timer are good, although are upgrades and don’t come with the cheapest model. A PIR motion sensor starts the fan if you move within 4 metres, so for my smallish bathroom it is always on. Can be a pro or a con depending how you see it. It could also cause another problem depending on where your bathroom is in relation to your neighbour’s property. If your fan is loud and near their bedroom, it may also disturb them, leading to potential friction. This could be a particular issue if their sleep schedule is different to yours, e.g. if one of you works nights.
Building regulations require that a domestic bathroom fan must extract a minimum of 15 litres per second. However, almost all extractors on the market exceed this and average 21-25 litres per second. There are even some models that go as high as 68 litres per second. As standard, the Envirovent has an extraction rate of 26 litres per second which is substantially more than the Xpelair above – this is the reason the latter is slightly quieter. Available in seven different colours, the Awenta offers an affordable option with features you’d expect. Modern looking, this extractor fan fits in well with newly renovated rooms or extensions. The Envirovent SIL100T is probably the best overall extractor fan choice for a standard bathroom. Coming in white only, it should suit most bathrooms, but leaves it slightly limited when dealing with bathrooms of different colours.
Black Extractor Fan Bathroom 100 mm with TIMER Inline STERR Black Extractor Fan Bathroom 100 mm with TIMER Inline
Even if your fan doesn’t wake anyone, it might simply be an annoying sound. If you’re unwinding in the bath after a long day, the last thing you want is the drone of the extractor fan running. This could be a good combo with the overrun timer; if there’s still a lot of moisture, even after the overrun, the humidity sensor will activate and complete the job. Do be aware, though, that the sensor won’t work as well if it’s dirty. Wipe it down every couple of months to ensure it works as intended. It’s a good idea to look for a fan with an overrun timer. This means it will continue to run for a set period after you switch it off. In most cases, you won’t stay in your bathroom long enough for it to have removed all the humid air before you switch off the extractor. Your bathroom is on the inside of the building and so has no windows at all. This is more common in flats Two speed options are available of 15 and 21 litres per second. 15 is the lowest extractors fans should be, so you have the option of increasing to 21 if you need more power or have a bigger bathroom.If you’re concerned anyone in your home might forget to turn on the extractor, then definitely consider getting a model that includes a humidity sensor. The sensor will detect if the bathroom’s humidity exceeds a certain level and automatically switch on the fan. This model comes in four variations, each with different extras like a Timer, Pull Cord and Humidistat. The variation with a Timer and Humidistat is the most expensive option, but one well worth looking into.
Great Deal 
New Comment