Joined in 2023 
82 
63 About this deal
Interconnection cord set: "assembly consisting of one cable or cord fitted with one non-rewirable plug connector and one non-rewirable connector, intended for the interconnection between two electrical appliances".
Similar connector to C5/C6, but with a key ridge instead of an earthing conductor, withdrawn from standard. This is exploited by high-powered computer power supplies, up to 1200W output, and even some particularly efficient 1500W output models [16] to use the more popular C14 input on products sold worldwide. There is some public confusion between C13/C14 and C15/C16 couplers, and it is not uncommon for C13/C14 to be informally referred to as "kettle plug" or "kettle lead" (or some local equivalent). These cables are sometimes informally referred to as a "kettle cord" or "kettle lead", but the C13/14 connectors are only rated for 70°C (158°F): a device such as a kettle requires the C15/16 connector, rated for 120°C (248°F).Standard sheet C25 shows retaining device dimensions. Sheet C26 shows detail dimensions for pillar-type terminals, where the end of the screw bears on a wire directly or through a pressure plate. Sheet 27 shows details for screw terminals, where the wire is held by wrapping it around the head of a screw.
Appliance outlet: "part of the interconnection coupler which is the part integrated or incorporated in the appliance or equipment or intended to be fixed to it and from which the supply is obtained".The C17/C18 coupler is often used in audio applications where a floating ground is maintained to eliminate hum caused by ground loops. Other common applications are the power supplies of Xbox 360 game consoles, replacing the C15/C16 coupler employed initially, and large CRT televisions manufactured by RCA in the early 1990s. The first edition of IEC 320 was published in 1970 [2] and was renumbered to 60320 in 1994. [3] Terminology [ edit ] Remove the 13 Amp plugs and replace them with the above C14 plugs. The C14 plug has Live, Neutral and Earth clearly marked inside the plug. The screw terminals can be a bit fiddly but patience pays off. The IBM Wheelwriter series of electronic typewriters are one common application. Three-wire cords with C13 connectors, which are easier to find, are sometimes used in place of the two-wire cords for replacement. In this case, the ground wire will not be connected. Xbox One [19] and some Xbox 360 power supplies, [20] some vacuum cleaners, CPAP machines, audio equipment, televisions, medical devices, IBM Wheelwriter typewriters.
In European countries the C15/C16 coupler has replaced and made obsolete the formerly common types of national appliance coupler in many applications. The C13/C14 connector and inlet combination are used in a wide variety of electronic equipment ranging from computer components like the power supply, monitors, printers and other peripherals to video game consoles, instrument amplifiers, professional audio equipment and virtually all professional video equipment. A power cord with a suitable power plug (for the locality where the appliance is being used) on one end and a C13 connector (connecting to the appliance) on the other is commonly called an IEC cord. The C13 connector and C14 inlet are also commonly found on servers, routers, and switches. Power cord sets utilizing a C13 connector and an E interconnection plug are commonplace in data centers to provide power from a PDU (power distribution unit) to a server. These data-center power cables are now offered in many colors. Colored power cables are used to color-code installations. [25] C15/C16 coupler [ edit ] The C19 power cable is used in higher current applications such as power PDUs in data centres, it is an industrial type connector, larger than the C13 and C15. Schuko Euro Power Cables Pin temperature is measured where the pin projects from the engagement surface. The maximum permitted pin temperatures, are 70°C (158°F), 120°C (248°F), and 155°C (311°F), respectively (the higher temperatures are not applicable to interconnection couplers). The pin temperature is determined by the design of the appliance, and its interior temperature, rather than by its ambient temperature. Typical applications with increased pin temperatures include appliances with heating coils such as ovens or electric grills. It is generally possible to use a connector with a higher rated temperature with a lower rated appliance inlet, but the keying feature of the inlet prevents use of a connector with a lower temperature rating.IEC 60320-2-2: Interconnection couplers for household and similar equipment. This section was withdrawn in January 2016. The general requirements for these items were incorporated into IEC 60320-1 and the standard sheets were moved to IEC 60320-3. North American rating agencies ( CSA, NOM-ANCE, and UL) will certify IEC 60320 connectors for higher currents than are specified in the IEC standard itself. In particular, UL will certify: A similar but polarized connector has been made, but is not part of the standard. Sometimes called C7P, it is asymmetrical, with one side squared. Unpolarized C7 connectors can be inserted into the polarized inlets; however, doing so might be a safety risk if the device is designed for polarized power. Although not specified by IEC 60320, and not clear whether any formal written standard exists, the most common wiring appears to connect the squared side to the neutral, and the rounded to the hot line. [23] [24] Note: Clause 9.5 was added to IEC 60320-1:2015, this requires that "It shall not be possible to engage a part of a non-standard appliance coupler with a complementary part of an appliance coupler complying with the standard sheets in any part of IEC 60320."
Xbox One Power Supply | Xbox One Console". support.xbox.com. Archived from the original on 2016-11-26 . Retrieved 2016-11-25. Appliance inlet: "part of the appliance coupler integrated as a part of an appliance or incorporated as a separate part in the appliance or equipment or intended to be fixed to it". One of the most common plugs found on mainland Europe is the Schuko connector, used in France Germany and many other European countries. US Power Cables The units themselves should be internally fused in any case. The fuse fitted to a 13Amp plug is really there as a last resort. The Samson unit will have overload protection also (there's a circuit breaker on the front of the unit that will trip in the event of an overload fault in the same way that a fuse would blow).
Sometimes referred to as a kettle power lead the C13 connector has 3 pins, often found on PCs and TVs. C15 Power Cables (Hot Condition)
Great Deal 
New Comment