Ubiquiti UniFi USW-LITE-8-POE

Product Information

After resetting the switch to factory reset, will POE devices connect automatically or we should reset all the POE devices to connect to switch. Is it possible there are custom configurations on the switch I will lose? I am unfamiliar with what is possible on this unit (port forwarding & such). The Ubiquiti UniFiSwitch Lite 8 PoE is a fully managed Layer 2 switch with eight Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE+ that provide up to a total of 52W PoE wattage for UniFi Access Points or other PoE devices. Nope, you will need to either forget it in the old controller (which is not possible in your case) or factory reset it. If you keep having problems with the installation of the firmware you can also try to install it your self directly on the device. To do this we are going to access the device using SSH.

Ubiquiti UniFi Switch Lite 8 PoE | USW-Lite-8-POE – Network

Step 6 ;). But yes, normally the reset button will work most of the time. But if you have a PoE device connected to an Unifi Switch, it won’t factory reset. And in some other cases, the Unifi Switch just won’t reset the factory mode with the button alone. Wait for the device to fully boot, the led will turn dark blue (or stay white if it wasn’t adopted before, approximately 5 minutes max) And what is the firmware version of the other switch? Make sure that both have the same firmware version.

I couldn't find a proper comparisson of both (POE is not needed), any insights on what they are capable of and not?

UniFi Switch 8 60W vs. UniFi Switch Lite 8 PoE : r/Ubiquiti UniFi Switch 8 60W vs. UniFi Switch Lite 8 PoE : r/Ubiquiti

Rudy, thank you for the guidance as I have a US-8-60W and had trouble adapting it. I followed your instructions and now the network is all up and running. Whether you own a motorhome, van or emergency vehicle, Poynting antennas can bring you the stable and reliable connection you need to stay in touch no matter the conditions or circumstances. Here is your buying guide to find the perfect model for you!I have an USW-48-G2 switch & a UDM Pro router. I had to reset the router & start from scratch. Is it possible to adopt the switch without resetting it? So, you want to improve your Wi-Fi signal and you keep hearing access points pop up all over the place as a solution. They sound pretty useful, but what are they, and what can they actually do? We’re here to answer all of your questions.