Fire Door Gap Gauge Checker Tool, Small and Light, Pocket Fit

Product Information

Comply with legal requirements while catering for the practicality and need for open fire doors during normal circumstances. Step 1– Find out what kind of door and frame you are inspecting to determine the required NFPA 80 requirements. Door Requirements – For the Top & Verticle Edge

Dual-marked feeler gauge for measuring narrow gaps or clearances. Individual denominations in metric and imperial. Steel blades measure from 0.04-0.88mm and 0.0015"-0.035" and the brass blade measures 0.254mm and 0.01". Fire doors can also save money because the smoke from a fire will damage walls, floors, furnishings and paintwork. If a fire door is present then the room should be salvageable with minimum costs as you aren’t required to replace all of your flooring or re-paint all of your walls. This entry was posted on Thursday, November 1st, 2018 at 4:23 pm and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Keep in mind and note all clearance measurements on the pull side of the door so you can document them for your annual NFPA 80 inspection. Fire door holdersAlthough fire doors should ideally be shut at all times, this arrangement is not always practical. A fire door holder – or fire door hold open device – can be fitted to a fire door to keep it open during normal situations. These devices can be directly connected to the fire alarm or be acoustically activated by the sound of the fire alarm. Once the fire alarm is triggered, the fire door holder releases the door for closing.

Fire doors prevent smoke from spreading throughout your building, preventing injuries from smoke inhalation and burns. Occupants inside of your building can remain safe for a minimum of 30 minutes through the use of regulation fire doors based on the fire door gap.

A fire door gap can be shortened through the use of surface-mounted smoke seals and rebated drop-down smoke seals. We can close the gap on existing fire doors easily using these products. This is suitable for an existing fire door gap up to 14mm on the underside of the door. Fire door alarmsFire door alarms are fitted to fire doors to prevent unauthorised entry and exit. These alarms are triggered by the unsanctioned use of a door. Fire door alarms can be used on interior and exterior doors and are used in various industries for differing purposes. Integrated door control systems establish foot traffic flow in one direction.In addition, the closing speed can be adjusted and holding angles can be set to between 65 ° and 105°. Step 4– If you still require some assistance we have a couple of how to use a door gap gauge videos that you can watch. Grab your gauge, find the size you are looking to confirm and insert the gap gauge under the bottom of the door and take an accurate measurement.

Fire doors are a critical part of fire protection in buildings. A fire door is a type of door designed to slow the spread of fire, heat and smoke from one compartment of a building to another by isolating the compartments. Fire doors can be found in almost every commercial building and business premises.This is the ideal solution for holding a fire door open and is essential for areas where access is a necessity. We can program these devices to have timed releases which will ensure the fire door is then lightweight, easy to handle and swings freely.

Intumescent seals, which are attached to or formed as part of a door and its frame, prevent fire and smoke from passing through a doorway. The gaps between a Fire Door and its frame need to be 2 to 4mm in width to ensure that both the door can close smoothly and that the fire cannot spread through the gap of the fire door. Our Fire Door Gap Gauge is a handy tool designed for easy use thanks to the clearly marked dark blue "Recommended Door Gap" area. The Scheme is a not-for-profit organisation founded by the construction industry to improve its image.Purchasing new or replacement fire doors requires accurate measurements and detailed knowledge on required materials and hardware to ensure compliance with regulations. Fire doors are a vital aspect of fire safety in any building, but they must be installed correctly and in good condition to ensure that occupants and escape routes are protected from the rapid spread of fire and smoke.