Joined in 2023 
82 
63 About this deal
Clearance for High-Performance CPU Cooler and ATX PSU Although O11 Air Mini is a compact case, it provides up to 167mm height CPU clearance, allowing users to mount their performance CPU cooler in the system. The mesh design on the front, top and side panels of the O11 AIR MINI have been optimized to allow maximum airflow from different sides of the case to the temperatures stable and low. The super fine mesh also acts as dust filter to avoid dust buildup inside the case.
The 7 Slot Mode has space for up to ATX motherboards. This mode will reduce radiator support – removing support for a top radiator when using any size motherboard. When using an ATX motherboard, the bottom radiator can only be 240mm, but with ITX and M-ATX you can install up to a 280mm radiator. This is an estimated performance guide, results will vary depending on the intensity of the game. This is not an accurate expectation across all games!Dual Chamber Design for Cable Management The dual-chamber design behind the motherboard tray made cable management a simple job. The 5 Slot Mode is ideal for ITX and M-ATX motherboards and allows up to 280mm radiators to be installed at the top. If using a M-ATX motherboard, the bottom radiator can only be 240mm, but with ITX you can install up to a 280mm radiator. While the Air Mini and the Dynamic Mini appear to be about same size, the Air Mini is actually a little larger. At 400 x 288 x 384mm (15.7 x 11.3 x 15.1 inches), Lian Li’s new case is shorter and fatter than the Dynamic Mini, measures 420 x 269.5 x 380mm (16.5 x 10.6 x 14.96 inches). Modularity Willis Lai / IDG
Make sure that your motherboard BIOS is the latest version. If not, recommend to update to the latest version. Unlike the case, Lian Li does not rely on aluminum for the frame. Instead, the manufacturer uses steel here. This benefits the stability of the case. All in all, the case makes a very good impression. Especially the workmanship leaves nothing to be desired. I definitely like the look and size of this one. While I like my old (and still current) case, this one would allow me to move my newly built system from my existing floor standing ATX mid tower and place it into this one on top of my desk. No more dog hair getting into my filters. it also fits my DRP4 and a full sized ATX PSU, which is most excellent. The price is reasonable, too. The O11 AIR MINI comes with 2 x 140mm PWM front fans and 1 x 120mm PWM rear fan pre-installed straight out of the box. Get your system up and running faster with ease.The power supply is mounted in the Lian Li O11 Air Mini as usual with four screws. Well thought-out by Lian Li: The power supply is slightly elevated and does not rest on the floor. This gives you the opportunity to neatly run cables underneath and thus reach the lower slots on the motherboard. Similar openings are also found on the upper edge. In the HDD/SSD case, the disks can be stored in two holders with the included screws. Once screwed tight, they can be put into the case. Practical test
Great Deal 
New Comment