Capri Tools XZN Triple Square Bit Socket Set S2 Bolt Wrench Bit, Pack of 10

Product Information

The Phillips screw drive (specified as an ANSI Type I Cross Recess [9] and type H in ISO documentation) was created by John P. Thompson, who, after failing to interest manufacturers, sold his design to businessman Henry F. Phillips. [10] [11] Phillips is credited with forming a company ( Phillips Screw Company), improving the design, and promoting the adoption of his product. [10] The original 1932 patent [12] expired in 1966, but the Phillips Screw Company continued to develop improved designs. [10] ISO 8764-2:2004(E) Assembly tools for screws and nuts — Screwdrivers for cross-recessed head screws — Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers" (PDF). Archived (PDF) from the original on 2023-04-30 . Retrieved 2023-05-01.

Chart of Torx fasteners and tools". Wiha Tools USA. Archived from the original on 2015-12-26 . Retrieved 2012-01-14. Tri-point Y000 Screwdriver (for Apple Watch and iPhone 7)". iFixit. Archived from the original on 16 October 2021 . Retrieved 28 February 2017.

The Supadriv (sometimes spelled incorrectly as "Supadrive") screw drive is very similar in function and appearance to Pozidriv. It is a later development by the same company. The description of the Pozidriv head applies also to Supadriv. While each has its own driver, [26] the same screwdriver heads may be used for both types without damage; for most purposes it is unnecessary to distinguish between the two drives. Pozidriv and Supadriv screws are slightly different in detail; the later Supadriv allows a small angular offset between the screw and the screwdriver, while Pozidriv has to be directly in line. [25] [27] [28]

This drive type has the disadvantage of not being as precisely controlled as can be obtained by proper use of a torque wrench; applications may still fail due to either too little torque being applied to correctly fasten the joint, or too much torque being required to shear the head, resulting in damage to the material being fastened. [ citation needed] Line Head and Line Recess [ edit ] Line head driver sizes [1] Internal In addition to screw drives, various nut drives have been designed to make removal difficult without specialized tools. Proprietary examples include T-Groove, Slot-Lok, Pentagon, Tork-Nut, T-Slope and Spanner designs. [69] Breakaway head [ edit ] a b c "Unterschied zwischen Pozidrive und Superdrive"[Difference between Pozidriv and Supadriv] (in German). Goedkopeschroevenkopen.nl. Archived from the original on February 22, 2014 . Retrieved 2014-03-20.National Bureau of Standards. (1942) National Bureau of Standards Handbook H28, Screw Thread Standards for Federal Services. pp. 177, 179, 182, 184 Clutch Head Bit Set (Set of 4)". Vintage Trailer Supply. Archived from the original on 2020-08-13 . Retrieved 2020-09-05. Tri-point-3 [ edit ] Oral-B rechargeable toothbrush, showing the TP3 headed screw used to hold the case together. When the rechargeable battery is no longer serviceable, the toothbrush case may be opened by removing this screw, allowing access to the battery and motor units for recycling. The wall adapter has a molded screwdriver on its case to facilitate this. Hi-Torque slot drives were designed by Alcoa Fastening Systems, for situations where very high torque is needed, along with the ability to repeatedly install and remove the fastener. [7] The design features curved walls, unlike the straight-walled slot drive.