JENOLITE Rust Remover Thick Liquid | Non-Drip Formula | Fast Acting Rust Treatment | Removes Rust Back To Bare Metal | 150g

Product Information

Once the rust has been removed, you can then use Jenolite Alloy Paint Aerosol in silver to renovate and refurbish your alloys for that new car look! Make sure you shake the bottle well before spraying and twist the nozzle to open. The spray bottle allows for an even application of the product and is more efficient. It goes a long way! For alloy wheels, it is recommended you use the Jenolite Rust Remover in the method mentioned above. You can remove loose rust with a steel wool or wire brush first. This is because alloy wheels are most likely affected by surface rust and it’s best to remove the rust fully to avoid misshapen alloys. Using Jenolite Rust Converter is simple. Depending on the choice of application method, you can use:

For an extra layer of protection, apply an Anti-Rust Primer to your radiator, such as Jenolite Anti-Rust Primer. This gives it an extra layer of protection before you apply the radiator enamel top coat, and helps slow down the corrosion process, giving a longer lifespan to your radiator. Rust converter does not provide a permanent solution, it can help prevent rust through creating a chemical barrier however it does not fully solve the problem of stopping rust forming again.The next stage is to prepare the radiator for the rust removal chemicals to be applied. First, place a large sheet beneath the radiator to protect the flooring, whether this is carpet or hardwood. The next step is to pour a good amount of Jenolite’s Rust Remover Gel into a plastic container, and then using a paint brush, spread the gel onto the radiator, paying most attention to any areas significantly affected by rust.

Our range of direct-to-metal paints can be applied on top of the affected area and instantly provide reliable rust-proofing for years to come. Produced by Hammerite, our car paints are available in pots or in spray cans and in a variety of popular colours. They’re perfect for DIY car-rust repairs. Car rust removal solutions from Halfords None of the products will affect stainless steel, but are very effective in removing surface rust and blue scale from welded areas. After removal of the scale, rinse with water and dry the surface. Jenolite Liquid can be used to remove the light oxide films that are produced after shot blasting or grit blasting. Apply to the surface for 2 to 3 minutes and immediately wipe dry while still wet.Rust Converter is a chemical formula which acts as a solution to rust buildup, working well on iron and steel components. Because the remover is more likely to remove all traces of the rust, it, therefore, prevents rust buildup and when used in conjunction with rust prevention solutions such as a rust shield aerosol can last a lot longer without the return of rust.