Varilight Intermediate Push-On/Off Switch Module (Dummy Dimmer Light Switch) 6A (1 Grid Space) White GPINTW

Product Information

To be used where there are three or more switches controlling the same light or set of lights, usually where one switch is a dimmer. The most typical example of this might be in a hallway, when perhaps there is a switch at the front door, a switch at the bottom of the stairs and one at the top of the stairs, all controlling the same hall light. On this circuit the middle switch (usually the one at the bottom of the stairs) will be an intermediate switch. This can be extended to four or more switches. The lamp can be controlled from six locations with the help of 2 two-way switches & 4 intermediate switches. Also, various electrical appliances such as machines, alarms, fans, can also be controlled from different locations. Gangs and ways are the terms used to describe light switch connections. They tell you how many light fittings the switch can control and how many other switches control the same light. Here’s an explanation. As we are dealing with electricity it is obligatory that we warn you about safety. We have a great project that helps you understand what you are allowed to do, what you cannot do and what are your obligations under the Building Regulations (Part P); Find out more about the electrical do’s and don’ts here. It’s always important to do your research before buying switches to ensure you’re getting the right product for your needs.

If you're planning to change or add switches throughout a home, it's worth thinking ahead about how many switches you need to ensure you get the right amount. Go from room to room and count how many lights need to be controlled. Then work out if any of these can be combined on a 2-gang, 3-gang or 4-gang switch and whether, in some cases, you need to control one light with multiple switches. Working out if you need an intermediate switch is simple. If you have three or more light switches controlling one light, you will need an intermediate light switch.In addition, the lamp in a multistory building on the ground floor otherwise in car parking shadow can be controlled from any floor through an intermediate switch.

Intermediate switch working principle is similar to a DPDT namely double pole double throw switch. This switch works by allowing three switches for controlling a single light. This switch is used in a multi-story building otherwise on a landing. Because the arrangement of switches can be done on top of stairs, the bottom of stairs, and the end of the landing. In that, an intermediate switch is used in the middle of the 2 two-way switches. By using these switches, controlling light can be done from 3 different places. Intermediate Switch Wiring/Wiring Diagram Our goal is to provide one stop place for electricians and electrical contractors, but we are happy to help other clients too. Please let us know should you like to discuss anything and we’ll get you in touch with an electrician who can provide a professional advice! Switches also come with different profiles, describing how the switch stands out from the wall. For example, raised profiles with rounded or square edges stand a few millimetres out from the wall. There are slim raised profiles that stand out less. And there are flat profiles that are almost flush with the wall.An intermediate switch is only used on certain occasions. That is when there are three or more switches on one lighting circuit. For all other circumstances, there are more appropriate switches to use.