About this deal
The Power LED lights up when the HT801/HT802 is powered on and it flashes when the HT801/HT802 is booting up. Insert a standard RJ11 telephone cable into the phone port and connect the other end of the telephone cable to a standard touch-tone analog telephone.
If the GXP21xx phone is on firmware 1.0.7.x, please upgrade to 1.0.8.x first, and then upgrade to 1.0.9.x. Delayed Call Forward. Dial “*92” and then the forwarding number followed by “#”. Wait for dial tone then hang up. Although the HT801 adaptor can be connected to any VoIP phone service, we supply it pre-configured for connection to the Premitel VoIP Phone Service.The HT801/HT802 supports Bellcore style 3-way Conference. To perform the 3-way conference, we assume that the call is established between phone A and B are in conversation. Phone A(HT801/HT802) wants to bring third phone C into conference: Alternatively, the HT801 can easily be reset to its default settings and configured for connection to another VoIP internet phone service. Toggles between active call and incoming call (call waiting tone). If not in conversation, flash/hook will switch to a new channel for a new call.
When placing the analog phone that is connected to the FXS port off hook, the dial tone will be played even if the sip account is not registered. If users prefer the busy tone to be played instead, the following configuration should be made: Updated Time Zone option “GMT+01:00 (Paris, Vienna, Warsaw)” to “GMT+01:00 (Paris, Vienna, Warsaw, Brussels). Note: For UCM63xx, it's recommended to use the latest UCM firmware so it's most compatible with Wave latest versions. These ATAs are all similar in nature. The major difference between the adapters is that the HT801 has one FXS port. Grandstream’s HT802 adapter has two.
The HT801 supports 1 FXS port which can be configured with 1 SIP account, while HT802 supports 2 FXS ports which can be configured with 2 SIP accounts. Please refer to the following steps to register your accounts via web user interface. Firmware marked with * is released with limited bug fixes and feature implementation, please read release notes for more information. For those who want the flexibility of using their own VOIP Phone ot ATA, Port out at the end of contract, if you can.