Bifold Door Magnet/Catch 65mm White

Product Information

To reduce the impact when doors bang together, our CatchStops are also fitted with clear pads on both ends of the CatchStop to cushion the blow. Just another way that makes our stops the best in the market!

To install the magnetic catch, make sure it is positioned correctly on the door frame. Start by holding the catch up against the frame, making sure it aligns with the corresponding catch plate on the door. One way to do this is by sliding the magnets along the catch plate. Experiment with different positions until you find the optimal placement that creates a strong magnetic connection. If you prefer not to use magnets, there are alternative methods to installing bifold door magnets. You can try using adhesive strips or hooks to secure the doors instead. Conclusion You’ll want to ensure a smooth connection between the catch and catch plate by testing and fine-tuning the magnets.In conclusion, fitting bifold door magnets is a simple and effective way to ensure that your doors stay securely closed. By following the steps outlined in this article, you can easily install the magnetic catch and adjust its position to achieve the perfect fit. There are two ways to fit this to your bi fold doors depending on the profile material, either insert a rivet nut into the sash and fasten the catch using the M5 bolts provided or screw directly into the door using the self drilling screws provided (the more common approach). Each catch is also provided with an "anti-rotation grub". This screw stops the catch from rotating around the central fixing point. Adjusting the position of the catch may be necessary to ensure a proper connection between the catch and catch plate. Attach the magnetic catch to the frame using the screws provided. Make sure the catch is firmly secured in place. Test the catch by closing the door and ensuring that it latches onto the catch plate.

The Standard CatchStop pair is 62mm x 30mm, they are bought as a unit pair (2 x 31mm) but work best fitted both top & bottom. The catch should be placed at a height that allows for a secure connection when the door is closed. Use a pencil to mark the screw holes on the frame. Then, using a drill and an appropriate sized drill bit, create pilot holes for the screws. First, gather a screwdriver, preferably a Phillips head, to secure the screws that hold the magnets in place. Follow our step-by-step instructions to prepare your doors, install the magnetic catch, and fine-tune the magnets for a perfect fit.

Key Takeaways

When fitting bifold door magnets, it’s important to consider safety precautions. Ensure the magnets are securely attached to the door and frame, and avoid placing them near electrical outlets or devices. Can Bifold Door Magnets Be Easily Removed or Repositioned if Needed?