Autoglym Polar Collection - Car Cleaning Kit Includes Polar Blast Pre-Wash Snow Foam, Polar Wash Car Shampoo, and Polar Seal Pressure Wash Coating

Product Information

Polar Blast is used as a pre wash snow foam and produces a highly dense foam blanket to your vehicle to help maximise cling time and loosen dirt.

Polar Seal contains silicones, which in some cases, can create smears once wiper blades are used on the windscreen. We would recommend cleaning your windscreen after you have applied Polar Seal to the rest of your car as part of your car cleaning process. Leave Polar Blast time to dwell and loosen dirt for up to 10 minutes, although do not allow it to dry on. Thoroughly rinse and dry your car to reveal a high-gloss finish that is protected with a hydrophobic coating. The car must be dried with a cloth and not allowed to air dry as water spotting may occur. No, it is not necessary. The vehicle should be clean before applying Polar Seal, ideally with Polar Blast and Polar Wash. Polar Seal should be sprayed over all exterior surfaces apart from the windscreen and then rinsed off immediately. Polar Wash can be used at various dilutions depending on the density of foam desired. However, we would not recommend using a dilution stronger than 50:50. Adjust foam gun settings as required to increase or reduce foam. 250ml of mixed solution should be enough to cover an average sized car.Polar Wash is a safe and effective cleaner applied after using Polar Blast to remove excess dirt, traffic film and grime from your paintwork. There is no benefit to building layers of Polar Seal. We would only recommend reapplication once water beading has ceased. We certainly do not recommend application more than once a month.

data-src="https://cdn.media.amplience.net/i/washford/haluk-car-cleaning-spot1-step3-process-winter21-1382x867" Once the Polar product has fed through at the desired level, begin applying to your car in accordance with the relevant Polar Series product instructions. The cleaner will begin to loosen dirt on all surfaces. For the most thorough clean we recommend agitating the foam with a sponge or wash mitt.We would only recommend its use in place of a shampoo if your paintwork has very light soiling. In these circumstances please ensure you rinse the vehicle first to remove any heavier contamination. This really is dependent on several factors including the level of foam you would like to achieve, the settings of your pressure washer and the hardness of water in your area. Polishing your car is a great way to fade small scratches and imperfections. Find out how with our handy guide. No. The Polar Blaster has been developed for use with pressure washers only, a hose will not have the required pressure or the right connector. Polar Seal is wax safe and we would recommend that if there is wax on the paintwork that Polar Seal is used as a top up. There is no need to remove the wax or other protection before applying Polar Seal.

Polar Blast has been primarily formulated as a new pre-wash product. By using it in advance of your regular Autoglym shampoo you will loosen heavy soiling and contaminants and begin to dissolve traffic film. This will significantly reduce the risk of contamination scratching your paintwork when you agitate the shampoo foam with a sponge or wash mitt.

It is important that Polar Seal does not dry on to the surface of the vehicle. Once the car has been coated it should be rinsed immediately. In summary the product has been developed to work neat through to 1part Polar Blast to 10 parts water. We have been very happy with the product performance diluted at 1:5. As a mid-range brand, there are plenty of brands both large and small that offer similarly priced products. Meguiar's is arguably the largest direct competitor, operating in a similar price range but with a wider selection of products (sometimes to a fault) and greater emphasis on accessories. Both are very similar quality-wise and the only real distinctions are whether you want simple products in Autoglym or the glitz and colour of Meguiar's. Ensure your car is still damp before applying Polar Seal and allowing it to dwell on the bodywork for up to three minutes before singing off. You should see an immediate hydrophobic layer of protection, evident with some truly gorgeous water beading. It's an incredibly easy way to get some extra protection, the only downside being that you can't apply Polar Seal to a windscreen, which means some careful trigger action.