LIGHTAILING Light Set For (Ghostbusters Ecto-1) Building Blocks Model - Led Light kit Compatible With Lego 21108(NOT Included The Model)

Product Information

Before we hide the 2 cables from the right we will first install an LED to the blue light at the right side window. To do this, remove this section at the grey stud with clip. Take 1 flashing Bit light and place it on top of the grey stud closest to the outside of the plate ensuring the LED component part is facing the correct way up. Secure this in place by connecting one of the provided transparent blue 1×2 plates over the top. Repeat this for the light on the other side ensuring the LED is installed to the stud closest to the outside and the LED component is facing the correct way up. We will now install flasing LEDs to the blue spot lights at the front. Remove the grey plates with clips from the pole and then disconnect the round blue pieces from them. Take the 2 groups of cables from the roof lights and loop them around so that we do not have too much excess cabling. Use some tape to tape the cables together to prevent them from unwinding. The Modular Building series is a dream come true for adult fans of LEGO®. With ultra-detailed buildings, ranging from a Town Hall (10224) to a Detective's Office (10246), there is enough variety in sets to create your own large scale LEGO® town. And now with our easy to install light kits, you can create your very own realistic and fully functioning town. LEGO® Technic

Super popular ideas like the NASA Apollo Saturn V (21309) or the Old Fishing Store (21310) are sets people can now own. And now you can combine our specially designed LEGO® lights to your collection and bring them to life! Easy to install LEGO® light kits Take another flashing Bit light and install it to this section ensuring that the LED is laid over the white stud and secured down by reconnecting the red piece over the top. Before dive into the KIT itself I have to remark, that the customer service was just fantastic before buying the KIT. I had some doubts and questions but they were just provided one of the best support online.

What's in the box

Take the 2 provided Lego 1×6 white pieces and connect them underneath the roof securing the front and middle roof sections together. If there's something strange in your neighbourhood, who are you gonna call? Why the Ghostbusters of course! The LEGO Ghostbusters Ecto 1 (21108) is a faithful recreation of the iconic vehicle from the hit 80s movie franchise, Ghostbusters! Authentic Cadillac ambulance engine sound that loops until you stop it. Includes unique start and stop sounds, and even a great"engine stall" sound that will be triggered 40% of the time when you start the engine.

This LEGO light up kit contains lighting features such as flashing sirens on the top of the Ecto-1, front and rear headlights, and flashing emergency lights at the rear of Ecto-1. Installation GuideHide 2 cables from the lights on the left side of the car (looking from the front) up the left side by laying them in between the white studs and then reconnecting the grey triangular plates over the top of them. When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way up (Yellow LED component exposed). You can either place them directly on top of LEGO® studs or in between.

Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be inserted only one way. With the expansion board facing up, look for the soldered “=” symbol on the left side of the port. The connector side with the wires exposed should be facing toward the soldered “=” symbol as you insert into the port. If a plug won’t fit easily into a port connector, do not force it. Connect the cables from the tail lights into one of the 12-port expansion boards ( expansion board#1) by first winding them around the board before connecting them into the first 2 available ports. We are winding them around the board so that we don’t have too much excess cabling to have to hide later on. If you want to control the lights and get a special sound kit, then it's best to get the Standard RC + Sound Version. However, both Standard RC + Sound, Standard Remote and Standard versions are a wonder to behold at the same time as they come with the same lights. ABOUT INSTALLATION Remove the following pieces from the 2×6 plate and then connect one of the provided grey 1×2 Lego plates on each side as per below. Take the cable from the LED we just installed and the 2 cables from the front right lights and hide them in between studs up the right side of the car by reconnecting the grey triangular plates over the top of them.Take 1 standard Bit Light (non flashing) and place it on top of the stud of the grey round plate ensuring the LED component part is facing the correct way up. Secure the LED in place by connecting the transparent Lego plate over the top.