Joined in 2023 
82 
63 About this deal
The integrated power supply shroud is also very spacious which means slotting the PSU into position is a stress-free task. The addition of a flap to cover all the excess cables is a great idea and does its job very well, even with the additional cables of this dual system setup. The Phanteks Enthoo Pro 2 Closed will have room for all the components you need to make an extremely powerful PC build. It is compatible with motherboards up to SSI-EEB form factor. As well as that there are significant options for cooling from space for up to a maximum of 15 x 120 mm / 8 x 140 mm fans to room. If you want to fit water cooling elements, there is space for radiators as follows: With so many options available, I expected there would be some limitations with the Enthoo Pro II. There are, but they are very minor and certainly wouldn’t stop me from parting with my own money to buy this case. The main area where the case could be improved is the width of the chassis. Adding maybe 20-30mm to the width would allow a little more breathing room for the vertically mounted GPU at the bottom, as well as a little more space for cable management behind the motherboard tray.
Finally, at the bottom of the case are four feet fitted with anti-vibration rubber pads that provide approximately 25mm of ground clearance for bottom airflow. The base of the case is also equipped with a full-length woven plastic mesh filter that can be removed from the front.
Product Reviews
Phanteks claims to have improved the design of Enthoo Pro II over the original, while the company has also added a tonne of new features. Users can now install dual systems or dual power supplies inside the new case and there is also an abundance of options for storage devices and exotic custom water-cooling solutions. eh, because of this post, I noticed this https://www.phanteks.com/Enthoo-MiniXL-DS.html, and I'm already starting to have (probably stupid) ideas about a PC build
Handling the cable management of both systems also went better than initially expected, the large cable cutout in the PSU shroud was perfect for threading all the cables through and looked quite neat. I like the idea that you can easily install multiple long PCIe cards and still have enough space for at least 8x HDD/SSD. 2x 3.5" spots on the bottom may interfere with long PSUs or their cables. In most cases that I have, drive bays near PSU are removed as they cause problems with installation. On pictures, almost all manufacturers show installation without cables and try to install there 1000W+ PSU with all the cables, so they won't have anything on the way.
Expansion space for more than a decade of hardware
KitGuru says: The feature-set of the Phanteks Enthoo Pro II makes it one of my favourite cases of the year so far. The modular design of the case means it can be configured for various usage scenarios and should please anyone looking for an affordable full tower chassis. In the motherboard area, ATX mounts come pre-installed and include a lengthened central one to aid the initial positioning. In addition, there’s space enough for wider motherboards, including full and proper support for the SSI-EEB standard as well as any boards described as E-ATX (those between 244mm and 330mm (9.6” and 13”) wide. Meanwhile, CPU coolers fitted to motherboards are “limited” to being 195mm tall. Inside the top section of the case is enough space for the installation of E-ATX motherboard which is the form factor chosen for our primary system build. Manoeuvring the motherboard into position is easy since there is plenty of space to the right-hand side, at the top of the case and a healthy gap to the PSU shroud.
Other than the standard test suite, we did two more tests with the three 140mm intake fans: one without the filter, and one without the front panel or the filter. We tried doing these tests with the fans at full speed initially, but Phanteks’ 1500RPM SK fans pushed so much air that they erased any scaling, so that results with no front panel or filter were only one degree from baseline. That’s a promising result in itself, but we need to see some scaling, so we reran these tests with the fans set to the speed we used for noise normalized testing (45%). CPU Torture Prior to load testing, we collect idle temperature results for ten minutes to determine the unloaded cooling performance of a case's fans and air channels. Thermal benchmarking is conducted for 1400 seconds (23 minutes), a period we've determined sufficient for achieving equilibrium. The over-time data is aggregated and will occasionally be compiled into charts, if interesting or relevant. The equilibrium performance is averaged to create the below charts. Another feature of the Enthoo Pro two is the option of running two power supplies inside the chassis. Using one of Phanteks own Revolt Pro power supplies, users can install a second unit into the case connected to the Revolt Pro to offer additional power for a single system or to be used for redundancy purposes in case of power failureIt is much of the same at the top of the case with a fine perforated metal mesh dust filter attached to the case via a flexible magnetic strip. Beneath the mesh is a mounting point for fans or radiators and a more open perforated metal vent, with a power button that combines a power LED towards the front of the top panel. Inside the PSU shroud is enough space to fit up to a 280mm long power supply, there are also anti-vibration pads along the bottom of the chassis and on the side of the PSU shroud for the power supply to rest up against, as well as a cable cut-out with a rubber grommet to route cables through into the bottom section of the case. Radiator Mounting- 1x 120/140 mm, 1x Dual (280mm), 2x Triple (360mm),1x Triple (420mm), 2x Quad (480mm) The main focus of the Enthoo Pro II is to provide a home for a huge amount of hardware. There are acres of space inside the chassis for water cooling, with four potential areas where big radiators can be installed. Both in the front panel and to the right of the top motherboard tray are mounting points for up to 480mm radiators, 420mm radiators can be installed in the roof and there is additional space in the floor of the chassis for a 360mm radiator too.
Alternatively, the bottom of the case can be used to house a second system. The Power supply shroud doubles up as a motherboard tray where a mini-ITX motherboard can be installed and a separate rear panel with a rear I/O cutout and three PCIe slots is used. Building a dual system inside the Phanteks Enthoo Pro II was an absolute breeze and went much better than I was expecting. Phanteks has thought of everything with the Enthoo Pro II. Users have so many options and the case can be utilised for different scenarios with the support for dual systems, dual power supplies or a storage configuration that offers huge capacity for SSDs and HDDs. There is a difference though, what I was referring to was that the Xilence is also a Dual Computer Case, similar to the Phanteks’ Enthoo Pro II and IMO the Xilence wins hands down as a dual computer case. The Xilence is much better than photographs show it as, and weighs an absolute ton, the quality is there.
Overview
It's worth noting the Enthoo Pro 2 comes with no fans of its own. This is a reasonable choice given that the case’s size and price make it suited to those who enjoy meticulously planning their build; just be sure to factor this into your budgeting.
Related:
Great Deal 
New Comment