Aidapt Easy Fit Slatted Bed Transfer Rail Design to Help Getting In and Out of Bed

Product Information

The rail should be mounted at a height that the user can comfortably reach whilst stood both from outside the bath and from in the bath. Please note that the 2in1 bedrail is NOT suitable for sprung divan base beds, framed beds with loose slats or electrically profiling beds. For these beds we would recommend the NRS EasyFit Plus Bedrail P11849/P11838. A high contrast finish may be helpful if you have low vision - choose grab rails in a colour that contrasts with the wall it is to be installed on. As a general guide there are two options for wall mounted rails by the toilet. If you have the same strength on both sides of your body it may be a good idea to have supports fixed on both sides of the toilet so that you can use both arms.

Once you are sitting on the edge of the bed, make sure you have your balance, and your feet are flat on the floor. To stand, hold the bed lever with one hand and push yourself off the bed with the other into a standing position. General maintenance Multifit Bed Levers are known by many as one of New Zealand’s most trusted and reliable bedroom aids. You feel unsteady or breathless when getting in or out of bed. A bed rail can provide you with reliable support, enabling you to regain your breath or balance, before going about your daily routine. The Bed lever will not carry the full weight of the user, it is only used for balance and support whilst moving from sitting, lying or standing.The lower portion is usually set horizontally and acts as a forearm support. This enables the user's body weight to be distributed through his or her forearm which may be helpful for someone with painful hands or wrists. Getting in and out of bed can be challenging when you don’t have anything to grab hold of to get you up and mobile. Our Bed Lever can be an easy solution to increase your mobility and make a huge improvement to your safety and independence. Toilet frames are designed to provide horizontal support for pushing up from a toilet, or for steadying the body when lowering onto a toilet. The frame, which stands over the top of the toilet, can either be free standing or fixed to the floor. as you sit and lift your legs into bed. As with all OTS Bed Grab Rails, the Bariatric versions are manufactured to meet all the latest safety standards. weigh more than the maximum user weight (between 100kg and 150kg depending on the type of bed lever you use).

Vertical rails may assist when pulling up into a standing position or for just maintaining balance. This should be a flat, unknotted piece of wood, which is screwed into the vertical joining pieces of the partitions. The grab rails can then be attached to the board. The College of Occupational Therapists recommends a 144mm x 19mm board/pattress with its external corners well rounded and the board itself fixed to the wall at least every 900mm (COT 2006).An epoxy, paint or plastic finish provides a warmer feel to rails, is hard wearing and will reduce the effects of condensation. A choice of colour allows for a colour contrast with the wall for users with low vision or for co-ordination of bathroom accessories.

Between edge of mattress and bed lever or pillow – use forearm to push down on edge of mattress, it should be firm enough so any gap created is less than 100 mm. Choosing a handle height that extends 300mm above your mattress, allows the handle to be within easy reach.A rail can be fixed horizontally to the wall 75-100mm above the bath rim (see dimension c in diagram). It should start 200mm from the tap end of the bath (dimension a) (COT 2006 p13, H M Government 2015, p58, diagram 26).

Next consider your ability to grip onto a grab rail. Do you have reasonable hand strength? Do you ever have pain in your hands, wrists, elbows or shoulders which would prevent you from pulling up or pushing down on a grab rail? What is your overall balance and ability to stand like? The cord and cleat fixing can be used to hold the lever hard against the mattress preventing entrapment between the lever and the side of the mattress. Horizontal rails may help when pushing up from sitting and provide support when lowering, e.g. on to a toilet. Most people find it easier to push down on a rail rather than pull on one, so horizontal rails are more commonly used. You don't have to physically buy the goods in person. If your parent, guardian or wife or husband buys the goods and services for you, then you won't be charged VAT. What counts as personal or domestic use? Some have a support leg which rests down on the floor when the rail is horizontal. Some models provide a single horizontal rail which provides support at one height; others consist of a looped rail which provides two alternative gripping positions. Some of these rails have a built-in toilet roll holder.Comprising of a powder coated steel rail attached to a hard-wearing, wooden baseboard that is sealed and lacquered. Our Bed Levers are high quality and built to last. Fixing to UPVC plastic door frames should be avoided as the frames are unlikely to have the necessary internal materials in the required area to support a grab rail's fixings. Rails set at an angle can help a person who needs a steadying support - e.g. to stand from a bath board to shower. The rail can be placed at an angle of 45 degrees up and away from the user. This keeps the wrist in a neutral position. It is not necessary to lean far forward to grasp the rail at the lower end and the hand can travel up the rail to maintain the support once the person is standing.