Joined in 2023 
82 
63 About this deal
It is also ideal to apply your custom vinyl when it is not too hot or cold. A temperature between 45 degrees and 90 degrees works great for application.
Apply the paint to the stencil using either a proper stencil brush or dense foam gloss style roller. Paint or roll in from the edges of the stencil - remember to roll or wipe off all excess paint from your brush/roller before painting to avoid paint bleed! Ask your paint store to give you a recommendation on what solvent would work for your specific boat surface. Contrary to some beliefs, do not try to use gasoline for this as it is highly flammable and could cause a fire. I think you have to have the confidence to have the correct amount of print on the brush and use a single stroke. Having a line to follow is no different to chalking it up first so I'm not sure it would make it any easier.
Personally I would not entertain painting a name on a boat, with or without stensils. I have done a bit of amateur sign writing in the past, but it is not easy, and a boat moves about whilst you are doing it, which is not helpful. Then, you can place the decal on the area that you want it to go and secure it with a piece of masking tape at the top to hold it in place. Unlike most companies, we pre-layer our graphics so you do not have to struggle to align two or more layers. I have just painted my Boat - how long before I can fit them? Please allow 6 weeks for delivery (Excluding Sundays and Bank Holidays) of the dispatch date then please let us know and we will be happy to assist.
Step 4 - is where you choose your name colour, shadows and outlines. You can also choose a combinations of shadow, outline or both. To move the shadow position, use the 8 position box on the right hand side.You can select various arch shapes, wave, bulge top and other special effects. The American Boating Association gives you some great pointers for removing old lettering from your boat. It is recommended to use a scraping and soapy water method because it is typically safe for a variety of surfaces. First, get a scratch-free plastic scraper. You should be able to get this at your local paint store. You will also need a solution consisting of 1 cup of soap and 5-10 drops of dish liquid. Palmolive is the brand they used. The solution works as a lubricant to protect from scratching your boat and also prevents the adhesive from rebonding. Your first step to applying your vinyl boat lettering and numbers would be to clean the surface. You can use soap and water for this or you can use an alcohol-based cleaner that will help rid your surface of anything that might prevent good adhesion.Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material If you need help with a more complicated or custom design or a custom font then please get in touch. If you have an EPS, PDF or other vector file then we may be able to use this. We can also pre-layout and space your decals on two lines (subject to approval)
Great Deal 
New Comment