Drayton 25478 LP711 (Mk4) 1 Channel Timeswitch

Product Information

This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons. The miGenie thermostat and miGenie gateway are pre-bound to the miGenie controller so they just need to be positioned in the best place for wireless communication. To help with this, there is a built-in signal strength indicator.

Wireless programmable room thermostats are easy to install, and most installers only need help with commissioning the system. First, remove the batteries from the transmitter unit and allow the screen to go blank. When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor. These settings appear in the installer menu and it is important to select the setting for your heat source: gas boiler (default), oil boiler, heat pump, or electric heating If you find yourself working on a heating system that is exposed to the elements and is therefore likely to feel the full force of any cold weather, protecting the pipes against freezing can stop a system breakdown. The industry recommendation for a room thermostat is 21˚C, but this may need to be adjusted if there are health considerations or elderly occupants that require a warmer environment.

SM Timers

Advise householders that concealing a TRV with furniture or behind a curtain will affect the performance of their system, making it less reliable as the TRV cannot accurately sense the temperature of the room. Advising customers on room thermostat settings

Plug the mains power cable into the gateway then connect the network cable from the gateway to the router. You can provide two-stage protection by installing a frost thermostat and a pipe thermostat to vulnerable pipework in garages or conservatories.

Easy 3

They can ‘advance’ the heating, which means the programmer will skip to the next ‘on schedule’ and the heating will remain on until that programme is due to end. Now that the TRVs have been installed, the next step is to balance the system using the TRV. Balancing is important, as it means that all rooms heat up evenly at the same time. Balancing this way using the TRVs prevents the need for re-balancing the system if a radiator is removed.