Joined in 2023 
82 
63 About this deal
Charge and discharge the battery completely once every 20 charge/discharge cycles. Discharge the battery until there is less than 8% power or until it can no longer be turned on, then recharge it to the maximum capacity. This power cycling procedure will optimize the battery life. The DJI Smart Battery is a lithium-polymer battery designed for the Phantom 3 series. It features four LEDs that display remaining battery capacity. Power management is handled internally meaning the battery doesn’t require a separate balance lead to control charging. Do not plug the battery in the charger and go to attend to other business. Ensure that you keep your eye on the chargers’ status bar. It will always indicate the charging level. Keeping an eye on it ensures that you don’t overcharge the battery. Insert the batteries into the charging hub, connect the charger to the USB-C port of the charging hub, and the Status LEDs in an array blink successively.
Batteries are a fraction of the cost of a new drone and you should always follow safety precautions when dealing with damaged materials. How to Prevent Battery Damage Android: Samsung tabs 705c, Samsung S6, Samsung S5, Samsung NOTE4, Samsung NOTE3, Google Nexus 9, Google Nexus 7 II, Ascend Mate7, Huawei Mate 8, Nubia Z7 mini, SONY Xperia Z3, MI 3, MI PAD Insert the batteries into the charging hub, connect the charger to the charging hub, and the Status LEDs in an array blink successively. The battery can be fully charged in about 1 hours and 35 minutes. After the battery is fully charged, the corresponding LEDs will change to solid green. The battery can be disconnected from the charging hub when charging is complete. Using a battery charging hub: When used with the DJI 30W USB-C charger, the battery charging hub can fully charge one battery in approximately 56 minutes and one Intelligent Flight Battery Plus in approximately 78 minutes.
02. Damaged or ‘bricked’ battery
The battery capacity is significantly reduced when flying in cold environments (i.e. air temperatures below 0 degree Celsius). When using the battery charging hub, the batteries will be charged in sequence according to their power levels, from high to low. Lithium Polymer batteries are lightweight and provide long flight times, However they have this problem where if you use them till they are flat they might have a hard time trying to charge again. After the batteries are installed, the charging hub can supply power to external devices via the USB-C port, such as remote controllers or mobile phones.
Keep reading. I’ve laid out a step-by-step troubleshooting process below that will help you fix this issue as soon as possible. Let’s get started. 01. Faulty or broken charger To fix the problem, connect the LiPo battery plug to the NiMH charger and charge the battery using about 0.1A current. Select a voltage matching the LiPo battery nominal voltage. It should take between 1-2 minutes for the battery to recover up to 3.3V in every cell. You can confirm this by reading your Phantom 3 battery’s total voltage and dividing it by the total number of cells. If these steps don’t help and your drone battery does not charge normally then you may need to reset the smart circuit. Drone Owners Network has a step-by-step tutorial showing pilots how to reset the smart circuits in their drone batteries. When charging your drone you should always keep an eye on the status bar that shows you how much the drone has charged. This is important because you should not overcharge your drone battery because this could damage it. Do not place the battery into regular rubbish bins. Strictly follow your local disposal and recycling regulations of batteries.
End the flight as soon as possible if the Low Battery Level Warning appears when you are flying in low temperature environments.
Great Deal 
New Comment