Furniture Clinic Wood Stain (Walnut) – Fast Drying, Highly Concentrated, and Easy-to-Apply Wood Stain for All Indoor & Outdoor Wood – Water Based & Non-Toxic – 250ml

Product Information

A. Sealing wood after staining isn’t required, but it is recommended. Not only do wood finishes enhance the colour but they’ll also protect the wood from scratches and help stop it from fading. We recommend using a Wood Varnish.

In all instances, ensure the surface is clean and any saw dust or dirt has been removed before applying the Wood Stain. Applying Wood Stain For reasons of hygiene and safety, personal grooming products, cosmetics or items of intimate clothing cannot be returned. But that's not all - this woodstain also provides a stunning satin finish that enhances the natural beauty of your wood surfaces. Its fast-drying formula means that you can achieve a beautiful finish in a fraction of the time it takes for traditional woodstains.Used Wood - If the wood is old, it may be painted or varnished. If so, remove any old coatings using a Paint & Varnish Remover first. These coatings will prevent the Wood Stain from soaking into the wood. If the wood has been treated with an oil or wax, wipe the surface down with thinners or mineral spirit to remove this. After removing the old finish, sand smooth with #100 Fine Sanding Pad. The longer you leave the excess on the surface to soak in the deeper/richer the colour will appear. We therefore recommend removing it after only a minute or two and if it dries too light, you can apply another coat. However, if you apply too much and it dries too dark, it is much harder to sand, strip and then re-stain the wood! Pine & Softwoods – Once you have prepared the surface as above you should apply a Pre-Stain Conditioner. This is because softwoods absorb wood stains in an uneven fashion and could come out blotchy once stained. If you don't have a conditioner, you should wipe the wood down with a wet cloth so the wood becomes damp. After the wood dries, sand it smooth using a #100 Fine Sanding Pad - this process helps reduce the uneven absorbtion of stain often found in softwoods. But that's not all. Johnstone's Indoor & Outdoor Woodstain is also an eco-friendly choice, made with low VOC technology. This means that it has a reduced impact on the environment, making it safe to use in your home or garden. A. We recommend leaving the stain to soak into the wood for one or two minutes before wiping the excess off. This will prevent the stain from staining the wood too dark; you can then apply a second application of Wood Stain if you want to darken the wood further.

Buy our Tester Kit that includes 9 colours of Wood Stain that we do(15ml Tester Pots in Slate, Warm Graphite or Grey are not included in the Tester Kit).A. You shouldn’t sand wood after you’ve applied a Wood Stain. The wood should be sanded prior to staining. If the wood stain raises the grain of the wood, you can sand the wood and then restain. A. Wood Stain is designed to penetrate into the wood and so the longer you leave it on the more it will soak in and the darker the wood will become. Wood can also only absorb so much stain before it becomes saturated and so any excess would then dry on the surface. This is why we recommend wiping the stain off after one or two minutes.