Siser EasySubli Sublimation Heat Transfer Vinyl 8.4" x 11" - 15 Pack

Product Information

This is good because, again, your garments are not under heat and pressure for an excessive amount of time, possibly damaging them. But, perhaps even better, you’re saving tons of time doing transfers in half the usual time! Other brands of cutters can be used with EasySubli as well. Read the Silhouette Cameo 3 post here! Read the Brother ScanNCut post here! That’s why it can’t be understated what an innovation being able to press sublimation transfers at 310°F is… your garments will thank you for it! For the printed image, I am printing on regular sublimation paper with my sublimation printer using sublimation ink.

Other brands of sublimation inks and printers may work, but they will require trial and error testing. Siser has partnered with Sawgrass to develop special inks and a profile for the greatest print quality with the least hassle. EasySubli HTV can be applied at a lower temperature (311) vs traditional sublimation temperatures of 400 for a lesser amount of time Regular sublimation also needs to be applied at high temperatures for longer time periods (for example, 400°F for 45 seconds). Siser Easy Subli has a much shorter press and heat time of 310°F for 15 seconds (on a shirt).The results demonstrate that SawGrass Sublijet ink is better on all the usual sublimation blanks, but, of course, Siser Easy Subli is best on cotton and dark fabrics.

Can and should I swap out the existing inks in my Sawgrass SG400 or SG800 sublimation printer for the EasySubli Inks?

Extra informatie

For the previous method, we do not want to mirror the EasySubli. But with this process, we do need to mirror the sublimation print. You can mirror the image in Design Space or do it in the printer settings. Make sure you do it in just one place, not both. After this blog post was first created, “Virtuoso Print Manager” has been updated to simply “Sawgrass Print Manager” or “Print Manager” and will be referred to as such or “PM” for the rest of this blog post. EasySubli HTV has a slightly softer feel than the inkjet printable heat transfer for darks we tested it against Press at 385 degrees for about 30 seconds. When you’re done remove everything from the top while it’s hot. Finished EasySubli with Epson Sublimation Print

When used on light colored cotton shirts inkjet printable heat transfer materials transfer the ink into the fibers of the fabric, whereas EasySubli sits on top as a decal Remove the protective sheet and locate the sublimation design on top of the EasySubli. Use heat-resistant tape to hold the print in place and then add the protective paper over the top of the sublimation print and use heat-resistant tape to hold it into place. Select “Virtuoso Print Manager” (AKA “VPM”)* from the list of possible printers and wait for the Settings window to appear. This is a very important step! Sending to the VPM allows you to adjust the print profile. Selecting “Sawgrass SG400” instead of VPM is not recommended and can result in a saturated output that’s not ideal.Now before you go out and buy up the whole lot, there’s a few more things we recommend having on hand to achieve best results with EasySubli HTV. EasySubli HTV Companion Products What is Siser EasySubli HTV? Siser EasySubli Heat Transfer is a lined, printable heat transfer material that can only be printed onto using a sublimation printer and sublimation inks. It can be used with various brand sublimation printers and sublimation inks. Carefully remove the printed sheet from the tray to avoid smudging the damp inks and set aside to air dry for 30 minutes. Damp inks and over saturated prints can prevent EasySubli Mask from bonding properly so this step is especially important if you plan to use the mask.

Upload your .jpeg or .png file and select “Simple”, “Moderately Complex”, or “Complex”depending on the level of detail in the image. These last few items are likely already in your craft arsenal, but were necessary to complete this project:The drying process can be sped up by placing the printed sheet under a Clam Shell Heat Press (that is open, on, and heated up) for 60 seconds. The residual heat will do the work of 30 minutes in just 1! With this drying method you may notice the colors begin to develop a little under the heat. This is normal and will not effect the overall vibrancy of the end result.