Crankbrothers Mallet DH Race Pedal

Product Information

Traction grooves are machined into the body, and each side gets eight adjustable steel grub pins. The cromoly steel spindle is longer than other Crank Brothers pedals, which gives a wider 57mm Q-factor for a more stable stance on the bike. The increased clearance between bulky shoes and the crank arms also reduces the chance of jamming a foot when trying to unclip. The Mallet’s platform measures 91mm long x 78mm wide. The problem with the 2 mm traction pad is that it lets the cleat preload the underside of the pedal mechanism too much. This seems to be the reason for the more vague sensation, especially when getting clipped in. It should be noted that this issue lessens as the cleats bed in, but if you want a distinctive in-and-out feeling then I don't believe the Mallet Trail will be able to offer that. This issue was also worse in some shoes than others, most notably the Northwaves. The function of the simple Eggbeater mechanism remains the same, with four-sided engagement from the stainless steel wings. The mechanism rotates independently of the platform, which can feel odd at first, but is easy enough to get used to. Combined with the two gaping holes in the pedal body, this rotatable mechanism means the Mallet dumps mud exceptionally well.

It’s no small challenge for a pedal designer to combine pin-based grip with the free rotation needed for cleats. But the consensus is that Crankbrothers pulls it off well. I’ve been riding the Mallet DH pedals for a couple years now. Before the Mallet E pedals were introduced, I rode the Mallet DH pedals on all of my bikes. Now that I have had the chance to ride these Mallet E pedals, I think they will be staying on my trail bike full time and don’t see why they wouldn’t make their way to the downhill bike as well. Whatever style of mountain biking you prefer, we’ve tested the best mountain bike clipless pedals designed for both XC efficiency and wide-platform stability. Our list of recommended clipless pedals (or clip-in pedals, if you prefer) includes platform and non-platform options. The traction pad feature first seen on the Mallet E has also been carried over to the Mallet DH, which consists of a removable, rectangular piece of polyurethane that sits on each side of the clip-in mechanism. There are different pad heights available, allowing riders to customize their pedals to work perfectly with their shoe of choice. The system does obviously involve more bearings and moving parts but DMR does offer full rebuild kits for all its pedals. So you can run its pedals for years and years. Which is to be commended in this age of ‘disposable’ parts.The ability to set the release angle of the cleats to either 15° to 20° means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike.

If you haven’t gelled with the Eggbeater mechanism in the past, your experience is likely to be much the same with the Crank Brothers Mallet Trail pedals. Eight removable pins are in place on each side, and there's plenty of room around the clip-in mechanism to prevent mud from building up. The Mallet Trails are a decent pedal, but I think that they're always going to suffer in comparison to their bigger and burlier siblings. The problem is that they don't offer support through the platform, and are more reliant on the traction pads. This means that if you're riding anything that includes a lot of rider input, you're going to want to have the 2 mm traction pads. However, the trade-off is a more vague sensation of getting clipped in and out of the pedal, without completely delivering on the feel you were hoping for in the first place.

Product

Interchangeable traction pad to optimize cleat engagement and improve shoe and pedal body interface

Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal You can also alter the float (natural foot rotation while you ride) and release angle (the point at which the shoe disengages) by swapping around the cleats. The default cleats give a 6 degree float and a 15 degree exit angle, but you can increase that to 20 degrees for more wiggle room by swapping the left cleat to the right shoe and vice versa. You can also buy cleats that give zero float and/or a narrower 10 degree release angle, though it feels less likely that trail and enduro riders would want either of those things. Verdict

Grip

The Crank Brothers Mallet Trail is a brand new clip-in pedal that’s designed to suit a wide range of riding types. Featuring the iconic four-sided Eggbeater mechanism and a compact two-piece machined alloy body, the Mallet Trail straddles the gap between the Candy and Mallet E. According to Crank Brothers, this is now the most versatile pedal in its clip-in range. The Crank Brothers Mallet Trail is a brand new platform clip-in pedal that fills a gap in the current lineup. The Crank Brothers Mallet Trail pedals