Aico EI1529RC Hardwired Smoke Alarm Remote Test, Hush & Locate Switch , White

Product Information

Wall mounted for ease of use – can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied) It increases the flexibility and user friendliness of the alarms by allows the user to remotely ‘Locate, Hugh and Test’ the alarms in the system: The unit is suitable for wall mounting using the surface mount box supplied or a standard recessed box, not supplied, may be used.

Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives. Please let us know should you like to discuss anything and we’ll get you in touch with an electrician who can provide a professional advice! Hush Momentarily pressing the Hush button switch allows remote silencing of false alarms. The system will reset automatically after approximately 10 minutes. In the unlikely event that a fire should occur during the Hush period the feature will be overridden when sufficient smoke has entered the sensor chamber of the smoke alarms in the system, or sufficient CO has entered the sensor of the CO alarms in the system. Note: The Hush feature will not operate if the CO alarm is sensing CO levels of 300ppm or above due to the increased danger.

Alarm Accessories

The wall mounted switch unit can locate the initial source of an alarm, silence any false alarms and test all the alarms in the system. The control unit is mains powered and interlinks via hardwire connection with the majority of Ei Electronics and Aico products, including carbon monoxide alarms. These switches are highly recommended for systems with a mixture of smoke, heat, and carbon monoxide alarms so that occupants can identify the source of the alarm and take the appropriate action depending on the type of emergency. Suitable for siting at any convenient point in the property. Up to 4 x Ei1529RC switches can be installed in a hardwired system along with a maximum of 16 x 3000, 2110e, 160e or 140RC Series smoke and heat alarms or 261ENRC Carbon Monoxide alarms.

This mains powered accessory increases the flexibility and user friendliness of the alarms by allowing the user to remotely Test, Locate and Silence alarms in the system: If a product fails after six months of receiving the item it is considered a warranty claim and is the responsibility of the buyer to pay for the return postage. We will then dispatch a free-of-charge replacement once the original has been received and tested. Book a DPD Return Here Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives

We Provide:

Test Pressing the Test switch into the on position will test all the alarms in the system. This operation is equivalent to pressing the Test button on all alarms in the system simultaneously and as such performs a true functional test of the system without having to reach up to each alarm in turn. Pressing the Test switch overrides the Location function and resets the system to standby.

This remote control switch can only be interconnected via hardwire to communicate with compatible Ei Electronics Alarms and accessories. Up to 12 devices can be interconnected. The Ei1529RC is a wall mounted Remote Control device powered by 230V AC. It is recommended for use in systems comprising of three or more hardwired interconnected mains Alarms. Our goal is to provide one stop place for electricians and electrical contractors, but we are happy to help other clients too. Compiles with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive)Add to quote” – this option allows to you gather items together and ask us for a no obligation quote. We’ll do our best to improve our already competitive prices where possible. Compatible with 3000, Ei2110e Multi-Sensor Fire Alarm, 160e Series alarms, 140RC Series alarms and hard wired interconnected Carbon Monoxide alarms Test the alarm: All alarms on the system will sound. This is the equivalent of pressing the test button on each individual alarm Suitable for siting at any convenient point in the property. Up to 4 x Ei1529RC switches can be installed in a hardwired system along with a maximum of 16 x 3000, 2110e, 160e or 140RC Series smoke and heat alarms or 261ENRC Carbon Monoxide alarms

Up to 4 x EI1529RC switches may be installed together with a maximum of 20 x 2100, 160RC and 260 Series smoke, heat or carbon monoxide alarms The Ei1529RC is a remote control switch that runs on 230V AC mains power. It is designed for use with 2100, 160RC and 140RC series smoke and heat alarms, and 260RC series carbon monoxide alarms. Hush, silence the alarm: Will silence nuisance alarms for approximately 10 minutes before automatically resettingMains powered Ei Electronics smoke and heat alarms require a 230V AC power supply and up to 12 alarms can be hardwire interlinked in one system. All alarms on the system will sound. This is the equivalent of pressing the test button on each individual alarm