Audio-Technica AT-LP3BK Turntable Automatic Belt-Drive Black

Product Information

At last, there’s an almost-all-in-one, budget turntable that treats your records as music and not a mere curiosity. If you are connecting to a specified PHONO input on a stereo receiver or an external RIAA preamp, then move the switch on the rear of the turntable to the PHONO position, which disengages the turntable’s internal preamp. Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind. Audio Technica understands what it takes to create entry-level products. It grasps what each performance is about, prioritising an entertaining performance ahead of focusing on any particular facet. If connecting to a LINE level input on a stereo (CD, AUX, TAPE, etc.) or powered speakers with an analog AUX input, then move the switch on the rear of the turntable to the LINE position, which engages the turntable’s internal RIAA preamp.

Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cableOnce the belt is properly installed on the motor pulley, you may remove and discard the red ribbon. Although the brass section wasn’t the smoothest I’ve ever heard and strings never really flowed as they should, the orchestra did offer a grand and rather epic staging that provided Francis with a large canvas to paint her words. I began by playing the Connie Francis original pressing Sings Bacharach and David (MGM) from 1968. The lady herself sings in front of a full orchestra. Audio Technica has offered another step towards the good sound with this new Audio Technica AT-LP3 turntable. This belt-driven turntable is an excellent upgrade to the original models such as the AT-LP60, although is somewhat more expensive than AT-LP60.

Next was a more contemporary pressing and the high energy sounds of Die Werkpiloten via Germany’s Vinyl on Demand label from 2012.

This brilliant budget turntable combines features and performance to great effect...

A built in phono amplifier is useful, especially for those on a strict budget. An external model will improve sound quality though so, again, if you buy the LP3, put one of your ‘to buy’ list. Connect the turntable’s attached RCA cable to your desired powered speaker or stereo receiver/amplifier. For audio devices that have a separate ground terminal, connect the spade lug on the RCA cable to the ground lug on your audio component to help minimize hum.

Once you have completed the setup, connect the power cord to the receptacle on the rear of the turntable and connect the other end to a working AC outlet. Then, making certain the tonearm lift control level is in the “down” position, place a record on the turntable and press the start button! Indicates whether MUID is transferred to ANID, a cookie used for advertising. Clarity doesn't use ANID and so this is always set to 0.Rather unusually for a turntable at this price though, it gives you plenty of flexibility for upgrades as and when you see fit. Of course, the Audio Technica phono amplifier is part of the build budget for this turntable and, hence, will be limited in terms of sonic quality. As soon as you can buy yourself a separate, external unit, do so. Internally fitted phono amplifiers also produce electrical noise which hampers sound quality. External models don’t infect a turntable in the same way. Install the clear plastic dust cover by placing the two hinges into the slots at the rear of the turntable. Note that the dust cover only opens up to a 45 degree angle, but you may also remove the dust cover if you prefer. Install the counterweight, making certain that the stylus force gauge dial is oriented towards the front. As you rotate the counterweight, it will thread onto the tonearm.

Set the preamp switch on the rear of the turntable to correspond with the device you are connecting to. It’s a fully automatic turntable, which means you don’t even have to lift the needle yourself – a simple button jab will return the tonearm to its starting position. Lasting power of attorney (LPA) forms changed on 1 July 2015.There is now just 1 paper form to make and register an LPA instead of 2. I feel obligated to start this post by saying I am NOT an audiophile and won’t pretend to be one. I just wanted to post a brief review of my current TT set up since I did not find any info about my TT on here after a brief search. I thought this might help others who are new to the vinyl community. Here’s the story: Bass, meanwhile was rather blurry and boomy but it could have been a lot worse. The above-mentioned damping did help in terms of stability which provided a measure of lower frequency control, driving the song steadily along.I began the test with the LP3 pushing music through its internal phono amplifier. This configuration is ok and perfectly usable and, as such, will get any analogue fan underway in terms of playing vinyl. In critical terms, though, sound was a little indistinct and muffled at the bottom end with a rolled off suite of upper frequencies that hampered detail. As a money saving option, the built-in unit is acceptable and will produce an admirable sound for the price but an upgrade to an external unit is top priority. Other features include a damped arm lift, die cast aluminium platter, 4.5mm rubber platter mat and an all in weight of 5.2kg.