Sony MDR-ZX330BT Bluetooth Wireless Headphones with NFC Connectivity - Black

Product Information

Bluetooth speakers and headphones have a pairing button.To activate pairing mode, press and hold the pairing button for several seconds Where Sony's MDR-ZX330BT falters in design is that it's, unequivocally, one of the cheapest-feeling mid-range headsets around. That has to do, mostly, with the unpadded plastic bridge that connects the two ear cups and the overall lightness (the headset weighs in at an ultra-light 150g).

If you store the headset for a long time, charge the battery to its full capacity once every 6 months to avoid over discharge. If you experience discomfort after using the BLUETOOTH device, stop using the BLUETOOTH device immediately. Should any problem persist, consult your nearest Sony dealer. Use the supplied micro-USB cable only, and connect directly to a computer. Charging will not be completed properly by an indirect connection, such as via a USB hub. Due to the characteristic of BLUETOOTH wireless technology, the sound played on this unit is slightly delayed from the sound played on the BLUETOOTH device during talking on the telephone or listening to the music. NOTE: If the device name is not displayed in the Bluetooth items, there is a possibility that the Bluetooth function is set to off. Set the Bluetooth function to on.However, according to your headphones / speakers setup, you might not hear sound coming from the headphones/ speakersyet. If that's the case, go through the following additional steps below to set them as the default speakers. If pairing is not established within about 5 minutes, pairing mode will be canceled and the headset will turn off. In this case, start over from step 1. NOTE: This process can take up to 15minutes. Do not turn off or restart your computer during this process.

One-touch connection (NFC) with a smartphone (Android 2.3.3 or later, and less than Android 4.1) [14] The above procedure is an example. For details, refer to the operating instructions supplied with your BLUETOOTH device.

In this case, delete the pairing information of the headset from the BLUETOOTH device, and then pair them again. Once the computer detects the device, it will then automatically proceed to installing the driver, after which the device will be added to the computer's list of devices. NOTE:The second option will reduce your sound quality compared to the first option because it favours signal strength over sound quality.