Fox Mud Guard MY21 36-38

Product Information

and sets a new benchmark for confidence, performance, and durability. Welcome to the big time. Smoother stiffer and more tunable than ever before Floating Axle design. Chassis alignment must be reset each time the front wheel is removed and reinstalled on both the Kabolt-X The ProGuard from RRP is a rigid polypropylene guard that comes in two sizes – standard and maximum. The standard is pretty big and offers plenty of protection, but the Max is 21mm longer at the front and 68mm longer at the rear so really ups the ante. It has a three-point fixing via the brace and fork lowers. There are 24 crown holes for zip-ties allowing it to accommodate a wide range of brace sizes and shapes and it’s compatible with 26in, 27.5in and 29in forks and (RRP claims) tyres up to three inches in diameter. The extended side mouldings also help protect the fork seals. To fit the Pro Guard, you do have to punch out some tiny holes, which is okay but there is a bit of trial and error getting it set to the correct angle. The Max size can also move a bit when riding hard and when sending it off a drop there was often a hard crunch as some part of the guard bottomed out on the fork/tyre. That said, if you want to ride 60mph through a peat bog and stay dry, this is the guard we’d recommend – dirt doesn’t get in your eyes, on your clothes, no matter how wet it is or how fast you’re going. Easily the best guard on test. Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to

fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern and 40 floating axles, but the end result is the same – perfect alignment and perfect performance. Lower Leg Channels Renowned for its ventilation and comfort, this all-purpose MTB helmet is fitted with 360 Turbine technology, offering great protection at a fair price.The ProGuard BOLT ON will fit most fork models listed below if they have the *THREADED HOLES at the rear of the fork brace (DISK BRAKE ONLY): WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre BRAKE / OFFSET: MINIMUM 44mm HUB: STD & BOOST FORKS: The benefits of Evol are further enhanced by our new Lower Leg channels and Bleeders, which both function to reduce continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork

that not only shaves grams but also increases torsional stiffness via its sleeveless, single-sided pinch bolt Our widely acclaimed Seal Shield offers greater protection for your fork seals from high velocity mud and spray lengthening service intervals MATERIAL The granting of a best price is not combinable with other promotions (e.g. "free articles) from Bike-Discount.Evol technology increases negative air spring volume, optimizing small bump sensitivity. Evol’s linear spring curve The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material You should be able to locate the mudguard and let go as the rubber side pads should hold it in place (ensure the slots are centrally aligned to the threaded holes on your fork) GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of

and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques

Also in the range

Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise on-the-fly adjustability. For 2021, their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange