DJI LiDAR Range Finder(RS)

Product Information

The Zenmuse L1 comes in response to burning demand from DJI users in the AEC and surveying industries – that of a powerful yet accessible LiDAR drone solution. The cross-section displays a 30mm slice of the model, and displays data variance within that slice. In this scenario, this elevation view shows the minimal elevation variance in the models created from the L1, but it is worth noting that sharp elevation changes in the 30mm slice could be responsible for elevation variance rather than noise. Deep Insights From LiDAR Data

For deeper insights, the data set can be turned into a Digital Elevation Model (DEM), as pictured below. When used with DJI’s flagship commercial drone platform Matrice 300 RTK and DJI Terra surveying software, it becomes a complete and versatile solution that gives the user real-time 3D data throughout the day, efficiently capturing the details of complex structures and delivering highly accurate reconstructed models. Thanks to its IP44 rating, The Zenmuse L1 can operate in rainy or foggy environments while the Lidar module’s active scanning method enables flights in low light conditions. Measured with video transmission control system operating in Control mode in an unobstructed environment free of interference with FCC compliance. DJI, the world leader in civilian drones and aerial imaging technology, today unveiled at INTERGEO, two new payload solutions for its flagship commercial drone platform Matrice 300 RTK, destined to serve the most demanding aerial surveying missions. The DJI Zenmuse P1 and DJI Zenmuse L1 are set to be game-changers for the industry, bringing more efficiency and new perspectives at an affordable cost without compromising the quality and accuracy of the data collected for precise aerial inspections and data collection missions. Combine the mighty L1 with DJI’s flagship commercial drone platform, the Matrice 300 RTK, and DJI Terra post-processing software, and it becomes an all-integrated, complete solution for accurate real-time 3D data acquisition. At a flight height of 100 m and a velocity of 10 m/s, a single flight with the M300 RTK and the L1 can collect data covering an area of 2 sq km.Image captured by the Phantom 4 RTK and processed at high resolution through five high-performance worker devices. Image captured by the Phantom 4 RTK and processed at high resolution through high-performance workstations. The accuracy of the L1 models means that surveyors can conduct detailed measurements and make key decisions about mitigating coastal erosion - safe in the knowledge that they are working from highly-reliable and robust digital assets.

How accurate is a drone survey? It's an important and frequently-asked question when it comes to aerial mapping. Built quality: The build quality of a drone can impact its durability, particularly when operating in challenging environments. For certain video specifications, LiDAR waveform and the exposure waveform on the main monitor cannot be enabled while recording. This model, of the same spit, shows the levels of sediment which have built up, with the red denoting the formation's highest parts. The L1 is the only aerial LiDAR sensor to support both a line scan mode and a non-repetitive scanning pattern – a unique technology developed by Livox. In this mode, as the integration time grows, so does the area being scanned inside the field-of-view (FOV). Following this methodology increases the likelihood of objects and other details within the FOV being detected. And the longer the drone LiDAR sensor scans an area, the higher the resolution of the data becomes (when compared to regular line scan). Speaking of FOV, the L1’s non-repetitive scanning mode spans 70.4° (horizontal) × 77.2° (vertical).After power is turned on, the IMU doesn't require warm-up; however, users must wait for the drone RTK to be in the FIX status before it can fly and work. D-RTK 2 Mobile Station for Matrice 200 Series V2 and Phantom 4 RTK can be upgraded to support Matrice 300 RTK. DJI Unveils First Integrated Lidar Drone Solution And A Powerful Full-Frame Camera Payload For Aerial Surveying Darren said: “The fact that the L1 is a dual-mapping solution means that you can combine two applications at once: You can undertake both a LiDAR and aerial photography survey, thereby allowing two potential deliverables to be created from a single flight.