TP-LINK TL-SG2210P 8 Port Gigabit Smart PoE Switch with 2 SFP Slots

Product Information

Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade. Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product. Yes. Requiring the use of Omada Cloud-Based Controller (Supported by TL-SG2210MP v1, v3 and above, while is not supported by TL-SG2210MP v2)

De Gigabit Smart Switch TL-SG2210P van TP-LINK is uitgerust met 8 gigabit RJ45 aansluitingen en 2 SFP sleuven. Alle RJ45 aansluitingen ondersteunen de PoE standaard met een totaal PoE voedingsbudget van 53 W en praktische PoE energiebeheer functies. De switch levert hoge prestaties, QoS op bedrijfsniveau, praktische beveiligingsstrategieën en uitgebreide layer 2 beheerfuncties. IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p V3.2: 261.02 BTU/hr (220 V/50 Hz) (with 61 W PD connected); 35.14 BTU/hr (220 V/50 Hz) (no PD connected) To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI 04-26-2023 25441 Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms. Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux.

How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI 05-18-2023 25441 Microsoft® Windows® 98SE, NT, 2000, XP, Vista™, of Windows 7/8, MAC® OS, NetWare®, UNIX®, of Linux. Feature Filter: All Configuration Guide User Application Requirement Further Assistance When You Set Up Troubleshooting Q&A of functional explanation or specification parameters FAQsSome official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty. Open Source Code For Programmers (GPL)

Yes. Requiring the use of Omada Cloud-Based Controller (Supported by TL-SG2210P v3.2, v5 and above, while is not supported by TL-SG2210P v4) IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 06-27-2022 139185 A firmware update can resolve issues that the previous firmware version may have and improve its current performance. To Upgrade