M2 Standoff Kit,180pcs Black M2 Male Female Standoffs Screws Nuts Assortment Kit with Box

Product Information

This is certainly not recommended for any serious or long-term use, but can be done for short sessions of data copying or if your screw is arriving the next day. FAQ Do You Need a Standoff for M.2 SSDs? Female-Female - Standoffs are available in both standard and swaged configurations. Swaged standoffs have one end that has been swaged (shaped by a device known as a swage) which looks like the male end of a female-male standoff. The main difference between the swaged female-female standoff and female-male standoffs is that the former has internal threads. Screwing it in is just a precaution to make sure that the drive doesn’t get dislodged if you accidentally bump into your PC or something. Female-Male - Unlike its female-female counterpart, the female-male threaded standoff has external threads. Most are hex-shaped so that they can be easily tightened with a wrench. Yes, this is a possibility, but one that should be done with utmost care, if you don’t want to loose your data or fry you parts mid-session.

A Standoff, formally known as a Threaded Standoff is a threaded component with a circular body and is available in a variety of combinations. These being Male-Female, Female-Female, and Male-Male. Standoffs are typically circular, hexagonal (hex), or with a square-shaped body depending on the material and size. The materials that they are usually formed from are: So give it a search and see if you can find something. You probably won’t find something perfect, but even a close enough fit is fine. It’ll hold your drive down just fine, to the point where you don’t even need to bother with the M.2 screws when you do find them. Though the drives might come loose If you move your PC around a lot. Skip the M.2 Screw entirely Get some actual M.2 screws and do it right. But in the meantime… Look for Old Small Screws in Your HomeLooking through the official ASUS Z97I-PLUS manual doesn’t help much either. The only thing I can glean from all of this is your motherboard can handle 2242, 2260 and 2280 sized SSDs; 22mm is the width and 42mm, 60mm and 80mm are lengths. This is baffling since—if what you are saying is true—the M.2 mounting screw being fused makes no sense; it should simply be a standoff with a small screw in it.

Hopefully, that explained everything you wanted to know about what you can do if you lose an M.2 screw! M.2 screws, a relatively new addition to the menagerie of things that you have to screw into your motherboard. Just make sure you don’t destroy anything by trying to jam in a screw that’s way too big. Tape the M.2 Drive DownThese are some tips to make it work (temporarily), but I don’t recommend doing them if at all possible, and if you do, make sure that you don’t just leave it like that. Some motherboards don’t have standoffs. Some do, and you need to install them. Some come with them pre-installed. And so on. Now, sometimes, we just have to wing it and find a way to make it work. You’re missing that M.2 screw but you still want to finish setting up your PC now, and not in 3 days when the new screw arrives, right? Threaded Standoffs are more commonly used in electronics, they are used to raise printed circuit boards above a surface. The insulating parts of a Standoff prevent electrical shorts by acting as a spacer and ensuring that the two components do not touch each other. Types of Standoff