Grandstream HandyTone HT801 ATA

Product Information

Please refer to the user manual for more information about IVR and how to access its menu options. REBOOTING HT801 Using Web UI Insert the ethernet cable into the internet or LAN port of the HT801 and connect the other end of the ethernet cable to an uplink port (a router or a modem, etc.) After a few minutes, you will be able to log in to the device and start using it again. Step 6: Upload the configuration to the gateway Grandstream’s HT818 gives users access to the above features and has a total of eight FXS ports. Advantages of Grandstream’s ATA HandyTone Series Assuming that phones A and B are in conversation. The phone A wants to blind transfer phone B to phone C:

Those details have been entered into the ATA adapter, and I've done these additional steps to attempt to get it working: Once the GXW42xx V2 device is upgraded to 1.0.3.x+, it cannot be downgraded to 1.0.2 x or earlier version. For GXW42xx V2 device on 1.0.1.4 or earlier version to upgrade to 1.0.17.1, the HTTP firmware upgrade path is: The computer must be connected to the same sub-network as the HT801. This can be easily done by connecting the computer to the same hub or switch as the HT801. CONFIGURING HT801 THROUGH VOICE PROMPTS G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B, G.726, iLBC, OPUS, dynamic jitter buffer, advanced line echo cancellation

Target Market and Availability

Insert a standard RJ11 telephone cable into the phone port and connect the other end of the telephone cable to a standard touch-tone analog telephone. So I think that I've 95% of it sorted - but need help with the additional 5% to get it to register. I know that when I got my broadband details, the customer services guy who gave them to me failed to tell me that the userid for that required '@broadband.voadafone.co.uk' adding to the value he gave out. Or that the VLAN ID was 911... so there's the possibility that this could be a similar situation. As I mentioned above the SIP user is just 'voi' followed by a string of numbers - so I wonder if there's an '@something.something' to be added on to that. For those who want the flexibility of using their own VOIP Phone ot ATA, Port out at the end of contract, if you can. Note:DP730/DP722/DP720 firmware can be upgraded once the connected DP750/752 base is upgraded to new firmware. The firmware version on DP730/722/720 can be different from the base. Please refer to the release notes for the handset version number. I'm attempting - like others before - to get the Vodafone VOIP that comes with gigafast with equipment other than the supplied Vodafone router. I've already successfully got my broadband working on a 3rd party Asus router, so I got myself a Grandstream HT801 ATA phone adaptor to attempt to do the same with the phone.

With all this, my port status remains unregistered. However - something is working, as I started getting phantom calls from sipvicious (dead air on 100, 1001 etc). So much so that I’ve been in and disabled / enabled the settings mentioned here: Grandstream is a privately held corporation with over 500 global employees. Located in Boston – the UC provider has offices in Los Angeles, Dallas, China, Venezuela, Morocco, Malaysia, Spain, Ukraine, and Colombia. Its complete portfolio of over 50 IP UC products is best suited for SMBs and enterprises of all sizes. Pricing structure and how to buy I’ve got NAT Traversal set up to use a public STUN server ( stun2.l.google.com:19302) - set in the grandstream adaptor If you port your number in contract, you'll effectively cancel the contract and have to pay exit fees. Not worth it. Note: For UCM63xx, it's recommended to use the latest UCM firmware so it's most compatible with Wave latest versions.FXS port to connect analog phone / fax machine to the phone adapter using an RJ-11 telephone cable. Dial Plan: { 10[015] | 11[129] | 999 | 11[68]xxx | 1[45]7[1-2] | 08001111 | 0845464x | 0[1235789]xxxxxxxxx | 1410[1235789]xxxxxxxxx | 14700[1235789]xxxxxxxxx | 00xxx. | x+ | \+x+ | *x+ | *xx*x+ } Firmware marked with * is released with limited bug fixes and feature implementation, please read release notes for more information. The Grandstream HT801 ATA Adaptordelivers powerful VoIP technology and routing capabilities to home and office environments, and allows users to successfully connect their analog devices to a manageable and powerful VoIP network. During an active call, press “Flash” button on the analog phone (if the phone has that button) to place the call on hold.

Note: For GSC3610/3615 HW1.0A, 1.0B and HW1.0C, firmware 1.0.3.8 is used and cannot upgrade to 1.0.7.x. Firmware 1.0.7.x is for GSC361x HW1.0D only. If the GXP21xx phone is on firmware 1.0.7.x, please upgrade to 1.0.8.x first, and then upgrade to 1.0.9.x.

Customer reviews

From our assessment of the ATA, setup is easy, as is management. For businesses looking to maximize productivity and efficiency of overall communication – the HandyTone Series will more than suit your interests. The call waiting tone (3 short beeps) indicates an incoming call, if the call waiting feature is enabled.