God Hand PN-120 single-edged nippers

Product Information

When the cutting edge and the cutting board edge are not aligned, it will result in an unclean cut and possible chipping and breaking of the blades. Please do not cut plastics that are too long for the blade. The load will be applied to one point, causing it to break or bend.

Using your GODHAND PN120 Nipper, remove the millimeter piece that was left from the initial cutting. Since the GODHAND PN120 Nipper is a single-edged nipper, it has a blade and a blunt end that holds it in place. During cutting, the blunt end acts as a stabilizer, allowing you to hold the sharp edge as close to the excess parts needed to be removed as possible. Once it is in place, all you need to do is gently squeeze the nipper, and it should cut the leftover bits off cleanly. When trying to slice and cut the 3mm runner, the blade will move freely and smoothly without any noise. When selecting Knippers, the best ones have a thin low-profile cutting nose. which will allow you to get right into the part when you cut it off. However, for those which go to a point, the point itself is so fine that after some use can break off and snap. If the cutting edge and the cutting board edge are aligned, even the slightest misuse will result in the edges being off.A nipper is a must-have tool in a modeler’s tool kit, and knowing how to keep the ones you have in good shape is important and will help you get the most out of your nippers over time.

FauxHammer.com is dedicated to finding the best tools for your hobby. Start with our list of Essential Hobby Tools which will lead you to find the Top-10 tools for each category.The blade gets thinner and more delicate towards the tip, so cut as close to the centre of the blade as possible We're not just making that up - Pete, James and Foxx have sworn by them for years and we are ridiculously excited to be able to bring them to you now. They truly are tools that are at home whether they are in the hands of a beginner or a professional. These are not mass-produced throwaway tools; they are tools designed by and for master craftsmen that will enable you to create incredible art.Ultimate Ultra-Thin Single-Edge! Ultimate Sharpness! There are two main types of cutter on this list Flat Edge and Dual Cut. On flat-edge cutters, one side of the cutters is flat. instead of cutting the plastic this edge acts as a stop allowing the other side to cut from only 1 direction. dia-cut is where both sides have a cutting edge and cut the plastic to meet in the middle. In my experience, wither of these really offer a better cut as both leave a bit of residue on the model. However, the flat-edge cutters do seem to last longer as you aren’t having 2 blades cut into each other. God-hand a cut above the rest (no I won’t apologise for that). if you just wanted to know which are the best cutters, these are them.

Compared to most nippers, the cut surface is much cleaner and neater, which makes it a good choice for those who want to complete plastic models without painting. When cutting small parts, it will not fly away. It will decrease the amount of time spent searching for the fly away parts. This set made by C.K tools is made for electronics wire cutting. C.K is a 100-year-old brand which makes incredible products. Precision engineering at it’s finest.A good nipper will be your dependable ally in even the roughest of builds and cuts. The best way to protect it and make it last is with proper maintenance and usage. In this blog, we’ll be talking about the basics of how to use and care for your GODHAND Nippers to ensure that the time you spend with them is long and worthwhile. Summary Hold it up to the light and gradually tighten the grub screw until no more light is visible between the nipper's jaws. If necessary, loosen and tighten it until it looks just right. Another set featuring a flat-edge and a bladed-edge but these have the benefit of the bladed-edge being super-fine. Like the options below this limits the stress on the plastic you are cutting For finely detailed parts, this can mean make-or-break.