Joined in 2023 
82 
63 About this deal
Anyone who works with microcontrollers such as the Raspberry Pi Pico or any Arduino board knows that most of these devices don't have on / off switches or even reset buttons. So, if you change code and need to restart them or you just want to power them off, you often need to yank the plug in and out, a huge hassle that could damage your gear. But with the Sabrent HB-B7C3, you can just toggle power on whatever port your microcontroller is plugged into. Unlike cheaper hubs, it supports a full 60Hz refresh rate over HDMI, while there’s a Gigabit Ethernet RJ-45 port for when you need a physical network connection. The Type-C and Type-A connections could be faster, with our SSD speeds limited to around 458MB/sec, but this is a great fully featured hub that’s still affordable and – most importantly – just works. Recent laptops have begun offering a USB-C technology called HBR3 with DSC, which we’ll explain more fully in the sections following our recommendations. The bottom line is that the technology offers something similar to the DisplayLink technology below, but as an industry standard. In our experience, although the technology is somewhat supported in laptops with 11th-gen Core processors, it works best in 12th- or 13th-gen laptops. Seems the more connections used the lower the speeds, how much will peripheral to peripheral transfers slow down peripheral to computer transfers.
Output ports: Make sure you get enough ports to attach the number of devices you’re likely to need. Most USB hubs have at least 3, more often 4, output ports, but at your desk, you may need a lot more than that. Also, consider whether you are attaching any USB-C devices (most output ports on hubs are Type-A). There are still a couple of caveats here. First, your device needs to support a DisplayPort 1.4 video output over USB-C, which will count out many Chromebooks and some MacBooks and Windows laptops. Second, the hub itself takes 15W of power, which means that – even with a 100W USB-PD charger – you may find some laptops not charging at their highest speeds. But if you’re happy to live with these compromises, this is one of the best USB-C hubs we’ve seen. Despite this, image quality on our 4K display was crisp and free of any fuzziness, and it’s easy to get a working desktop setup on a laptop or tablet. You might want an extra Type-A port with a higher spec, but if you’re looking for a hub for life on the go, this one’s tough to beat for portability or convenience. It is priced the same as the Caldigit Element Hub, which is still our favorite Thunderbolt 4 hub, with its four 40Gbps/18W Thunderbolt 4 and four 10Gbps/7.5W USB-A ports. However, if you own a large power-hungry laptop, the Belkin’s 96W USB PD charging will impress. Where once DisplayPort 1.4 was superior to HDMI, HDMI 2.1, as seen here, is as powerful if not more so than the top DisplayPort.Lasuney’s 10-in-1 hub (two USB 3.0 ports, two USB 2.0 ports, two HDMI 1.2 ports (4K@30Hz), DisplayPort gigabit ethernet, microSD/SD, USB-C power input) offers a lot for your money, including an unusual mix of not one, but two HDMI ports, and even a DisplayPort. Thanks to ethernet support, the hub can replace many of your wired connections. Power input is rated at 100W in, with about 87W available to the laptop. Caldigit has sacrificed one of the TB4 ports for a dedicated DisplayPort, which is fine if you need that video port but not as flexible as leaving three downstream TB4 ports with which you can add adapters for external displays.
Example, using a sabrnet USB 3 hub to transfer a 9Gb file SSD to SSD (hub port yo hub port) takes over 9 minutes, while it only takes 15 seconds to transfer to or from the computer. Upstream connection (Type-A or Type-C?): USB hubs have multiple downstream ports to connect to your devices but only one upstream connector, which could be a port but is often a built-in wire that connects to your computer. Many laptops, including a lot of the best Ultrabooks, only have USB-C ports, so your hub's upstream connector would have to be Type-C. Keep in mind that the hub’s power port is for taking power into your laptop, and not outto a phone. But your hub may still be able to charge your phone, with some caveats. A “bus-powered” USB hub connects to your laptop and pulls power from it, which it has share with several devices—and it won’t do it that well. This does make it reasonably hefty but still much easier to travel with, and is perfect for laptop professionals often on the move and working on location. Ethernet is easier, as it’s hard to find a hub that doesn’t support Gigabit Ethernet speeds. That said, a small number now support the faster 2.5 Gigabit (2.5GbE) standard, which isn’t a priority for most home networks, but a plus for advanced users or just for future proofing.In addition to the SSD, the Anker PowerExpand has an HDMI out port and two USB 3.x Type-A ports that operate at 5 Gbps. There’s a USB-C power pass-through you can plug your laptop’s power adapter – up to a 100-watt unit – so that you can charge your computer while using this hub (the USB-C port does not work for data transfer; we tried).
HDMI: A hub can be very useful at a desk, especially if you want to hook your computer up to an external monitor. We connected each of the hubs via HDMI to a Philips 272P7VUBNB/27 monitor with the resolution set to 4K, and we used the Blur Busters UFO Motion Test to confirm the refresh rate. Most hubs support only a 30 Hz refresh rate (the image refreshes 30 times a second) at 4K resolution, but a handful now support a smoother 60 Hz rate, and we prefer those hubs that do. Razer looks at power distribution differently from other manufacturers and we still can’t quite understand how each port shares its charging capacity, but it worked well in testing.Both USB-C and Thunderbolt use the same USB-C connection. The difference is that a “generic” USB-C connection typically provides 10Gbps of bandwidth, and Thunderbolt provides 40Gbps, with a road to 120Gbps with 2024’s Thunderbolt 5.
Overall, Anker’s hub is well designed, with adequate spacing between the two 5Gbps USB-A ports. There’s also a 5Gbps USB-C connection for data, plus a second USB-C port for power input at up to 85W rated. (The charger allows up to 100W in, but supplies 85W.) An HDMI port allows for 4K/30Hz video or 1080p/60Hz video to a single external display, standard for the category. Ethernet is excluded, however, so you’ll need to use Wi-Fi instead. Cord length is about 8.5 inches, above the standard 6-inch length.Speed: Most USB hubs operate at standard USB 3.0 (aka USB 3.2 Gen 1) speeds of 5 Gbps. However, a few can deliver 10 Gbps. There are also some cheapies that are limited to USB 2; avoid those at all costs. Powered or not? Some USB hubs come with their own AC adapters so that they can provide more power than your computer delivers from one of its ports. Bus power from your computer can be pretty low, not enough to juice several power-hungry peripherals at once or to charge devices at a reasonable rate. By definition, a USB hub that needs its own plug isn’t very portable.
Great Deal 
New Comment