Ideal Standard SV01967 Dual Flush Valve Seal & Clip, No Finish

Product Information

With fitting instructions supplied, removing and replacing the valve seal and clip has never been any easier. If your Ideal Standard flush valve won't seal properly and is constantly passing water into the toilet pan but there is no sign of an inlet valve failure, it could very well be that the base sealing washer needs to be changed. Over time as the flush valve is opened and closed, small imperfections tend to occur in the surface of the rubber washer causing the washer to be warped and not providing an adequate seal. We also have a huge selection of spare parts for your toilets and toilet seats, if you have a leaking toilet or your toilet seat is wobbly we hopefully have the part you are looking for. Ideal Standard have only ever manufactured one type of seal and clip, so if you have a seal and clip like this, then this listing will be the replacement you require.

This replacement seal is built to suit the SV range of valves fitted to many Armitage Shanks and Ideal Standard WC Toilet cisterns.The new seal is larger than the old one which will have worn away over time and use which is the cause for the leak that you now have and the reason for the replacement seal being necessary. We advise purchasing a couple of these washers at a time so you've got one readily available in the event that the washer fails again in future. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products.

The Ideal Standard dual flush valve seal and clip (SV01967) is a genuine, brand new Ideal Standard product, covered by a minimum 1 year Ideal Standard manufacturer's guarantee. Many make the mistake of purchasing a full replacement flush valve at the first sign of any issue, replacing just this washer may save you a lot time and money in the long-term. TEST: If you turn the water off (from the stop cock bringing water into the house OR an isolating valve on the cistern), leave it for up to an hour, does the cistern empty? The Ideal Standard SV01967 Dual Flush Valve Seal is a genuine Ideal Standard product, covered by a manufacturer's guarantee.

Ideal Standard flush valve won't seal properly and is constantly passing water into the toilet pan but there is no sign of an inlet valve failure, it could very well be that the base sealing washer needs to be changed.

We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. With the Armitage Shanks SV flush valve range there is no need to remove the entire cistern to service or replace the valve. Do not be concerned if you purchase this new item and it arrives and you think it is bigger than the old. This seal is a replacement for the worn seal in the toilet cistern which is allowing the water to run into the toilet between flushes.our operatives are all experienced within the industry and are more than happy to help with any questions. NOTE: Replacing the diaphragm may not always resolve your problem as the fault could be with the valve itself but it is a cheap way to try and resolve and is usually successful. If you have water running into the toilet pan continuously and are not sure if you need to purchase a spare part / replace the flush valve or inlet/fill valve you can try this simple test to determine. Easy to fit once you find out how to access the seal in the type of flush mechanism you have without damaging the existing set up. Dead easy to replace, instantly stopped toilet constantly self flushing slightly, didnt even need any tools that's how easy it was to replace, saved me a small sum of money ( plumbers labour) watched you tube for self tutorial, job done in 2 minutes.