Round Downlight/Spotlight Surround/Bezel Repair Ring MATT White (65mm Hole, 110mm Outside)

Product Information

In the end, I cut some squares out of hardboard, cut holes with a holesaw and then mounted these behind the plasterboard and then skimmed over.

The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. They can also cover up any mistakes with cutting the right size hole for your light – we won’t tell if you don’t!Crucially the repair kit requires no access to the ceiling space, its design allows it to be manoeuvred through the cut out and fitted inside the ceiling leaving it invisible from below.

Figured there must be something (like the rings that fitted around ceiling roses or square light switches) anything here that might help? Problem is, the older lights were 102mm bezel diameter, the new ones are 86mm (I didn't know this until the sparky had fitted them, should have checked, my bad). C-FIX Repair Kit, seldom see them over here, but linky below shows what they do, should be easy to fabricate something to achieve same result. The Downlight Spotlight Surrounds can be fitted behind the spotlight, so will not damage the lights. Brilliant service from start to finish, and very courteous communications, Excellent quality product, Perfect item as described, Tracking was clear and up to date, Arrived very quickly, Packaged was excellent.The Liners are not visible from below and do not protrude through the cut out, therefore allowing the flush fitting of any standard downlighter. You can get thin white round adapter rings that would slot over the lights and sit between them and the ceiling. So see if you can get a round piece of downpipe or similar that you can make the correct size - it may be that you'll need to cut a slice out of it and close it to a smaller circle. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). Until now the only solution for downlighter cut out ceiling repair was to replace sections of ceiling or in some cases to replace the entire ceiling.

The spotlight surrounds come with protective film on both sides, this must be removed before fitting.It is a measurement of how well a light source renders the true colour of an object compared with natural daylight. Matt white remains the top choice for downlight finishes due to its universal appeal and it blends in with white ceilings. Allow the adhesive to set - this may require you to pull gently down on the panel - especially if it's a non gap-filling stuff like PVA. We've replaced the downlights in our hall, one of the holes has become damaged and in now too large for the downlight. Whether you’re picking for a living room, retail premises or office space, it’s only natural to focus on getting the small details right.

If you like the soft light you get with old style reflector lamps just swap your old lights for brand new R50, R63 or R80 fixtures in white, polished chrome or polished brass.A simple yet effective downlighter cut out ceiling repair kit invented and developed by a North Norfolk professional decorator is now available. The matt white finish is especially popular for downlights as it seamlessly merges with white ceilings.