Quick Bluing Solution (250 mL) - Brush and Immersion Application - Gun Bluing

Product Information

dry off metal make sure to have some cotton or vinal gloves even as you clean them, you dont want to touch with bare hands, and use some thin wire for a handle when boiling. Modified black oxide process can be used too (there is at least one USA patent on that subject, uspto.

weight, ¼" NPT pipe thread, and it requires specific water column gas pressure: 11" for LP and 4"-6" for Natural Gas, with a 25,600 BTU rating. However I still get people contacting me asking what solution I use as the one they use doesn't work. Seller is also excellent with regards to communication, replying to inquiries in a timely manner and confirming part compatibility with the manufacturer. Plus, putting steel into nitric acid is very likely to evolve clouds of yellow NOx-ious choking gasses. I was suitably wary of Mr Cockup riding into town so did everything very gingerly and at arm's length - and, unusually for me, I wore all the proper safety gear.

You shall therefore keep confidential all information and data coming to its attention during the consultation, to keep them with security measures and a degree of care no less than those accorded to its own confidential information.

FredB wrote:i used this method 30 years ago in a company laboratory with a glass screen between me and the solution. It certainly worked better than I expected and much better than my usual experiences with cold blue. Grade 0000 steel wire wool can polish metal and dig out rust without damaging or marking the surface.When I carried the parts out in the sunlight I noticed that there was a very slight blue tint to those steel parts. However, the chemicals from the bluing process can cause uneven staining on aluminium and polymer parts.

But the brand BALLISTOL offers much more: a range of care, protection and cleaning products for people, animals, and technology.Q. I have tried rust bluing using the two-acid / iron filings [affil link] method for quite some time, but I always get various shades of gray or even a black, but there is no sign of a blue color. matter what you use as long as it is corrosive, in the article I compare salt water with rust blue solution and end up with the same result.

You may need to deal with substances from your bluing baths as hazardous/special waste because they have corrosive and irritant properties or are contaminated with heavy metals.The bluing process involves treating a gun with a solution that turns red iron oxide or rust (Fe2O3) into black iron oxide (Fe3O4). barrel and receiver with magizine tube) 6 cycles did a beautiful job,much better then hot blue on a vintage gun,very dark blue instead of black I did all carding with 0000 steel wool.