X AUTOHAUX 4pcs 12V Universal 6 Pins Car Power Window Switch Random Light Color

Product Information

You loose the feature where you can open/close whilst ignition is off BUT you could get that back by replacing the IGN live with PERM live but I wouldn't do that as it affects the security. All content is viewed and used by you at your own risk and we do not warrant the accuracy or reliability of any of the information. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item.

ECU, the ecu is there to cut the power when the glass reaches the end of it's travel if you still had your finger on the button then there would be a bit of damage within the door, also the disco has a single touch descending drivers door window the ecu looks after that also. Out of the 3 original switches I have 1 good one, 1 temperamental and 1 that I think I duff and after a bit of testing 1 dead passenger window motor .If the new one has the same problem, exercise the wires going into the connector and the connector itself. Also, in case you didn't know, sometimes you have to "reset" the driver window Auto function if the battery has been disconnected or run too low - raise the window all the way by holding the button (don't use Auto) and hold the button up for a few seconds past when it seats. It will be based on fitting it to a defender but if someone in here gives me a circuit diagram for the disco then I'll include changes for that. This makes the windows have a permanent GND and the up/down is done by the addition of a 12v from the ignition live i. They come apart easily and some careful cleaning of the switch contacts with alcohol or good contact cleaner can bring them back to life.

Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).The passenger door switch is wired differently as it is connected through the drivers side on - I assume to stop the motor being told to go up and down at the same time? New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . Below is a picture of the 2 switches I have - they are very slightly different looking - one is marked as made in France, the other has no markings. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. The roll up module is wired to that effect so if I use the 6 pin switches I either have to supply the power the other way round with the illumination connection to gnd which would mean that the light would be permanently on with the ignition, like that but using a relay to create a neg switch from the side light live or wired as normal and rewire the roll up.