Laser 6869 Safety Locking Wire 0.8mm x 30m

Product Information

Whether you need a new or used Trials bike or the latest boots, helmets, clothing or parts and accessories, we have everything you could want or need.

The first picture in this article does not conform to proper techniques and practices and ought to be replaced with a better example. The gauge of copper wire utilized in this application is such that the wire security can be overcome with minimal breaking force by hand, without damage to the equipment or persons, and once broken, remains affixed to the equipment without the introduction of foreign object damage (FOD). Although many systems purport to be more efficient than installing traditional safety wire, an advantageous by-product of the twisting method of installing safety wire is that it leaves a highly visible and easily inspectable indication that the fasteners in question are in fact properly secured. When clipping off ends, the ends can go flying off which makes their recovery difficult and can cause injury to anyone in the immediate vicinity, such as the technician or an assistant; however, this can also be easily mitigated by using extra care or by using safety wire pliers that have a special insert that is designed to catch clipped off ends. Although primarily used in motor racing, using safety wire to secure components finds many applications in high performance and classic road cars also.

The two ends of the wire-loop thus formed are joined by twisting them together with a tool, using enough twists to be secure, then released from the twisting tool. citation needed] The user-friendly tooling guarantees a consistent installation each time it is used. The installation and inspection of Safe-T-Cable is simple, easy to train, and rework is virtually eliminated. In a similar manner, critical system switch covers are protected from inadvertent activation, through the application of witness wire. S. is being secured, then the safety wire when installed should put tension on the bolt in a clockwise direction, since that is the direction that the bolt turns to tighten.

Our company is the recognized leading distributor of stainless steel drawn wire in Europe, with yearly sales in excess of 6000 MTons. However, the amount of waste product is relatively small, it is non-toxic, and the hazard can be mitigated altogether if technicians properly dispose of any waste product. g., a production motorcycle which was built for the street but which has been converted into a race-bike).Since it remains twisted instead of unraveling, it acts as a fixed loop and will not back out without considerable force (greater than the stresses which it is intended to counter) being applied.

For all our parts such as fittings, oil coolers, fuel hoses and other parts excluding brake or clutch line kits we offer a 12-month warranty.This application of witness wires is widely varied, and may cover a broad range of types of equipment and numerous situations. The two drilling jig kits from Gunson (part number 77080 Metric or 77118 Imperial), include both a nut jig and a bolt jig. The advantage to this tool is its long and thin design, which can access hard-to-reach areas where one's hands or pliers do not fit. Professional lock wire for commercial or occasional use Stainless steel lock wire Twist safety wire Commonly used in motor sport and also used in the aeronautical and defence industries Wide range of uses including safety wiring of nuts, bolts, turnbuckles to prevent loss through engine vibration / movement As well as this can be used for crafts, jewellery making, tying and binding Also used to secure oil drain plugs, filters, grips and bolts etc.

Drilling them is often difficult as, due to their small size and irregular shape, securing them properly and applying a drill effectively can be trying. Lock wire or safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration as well as other forces. We are also the UK and European distributor for Aircraft Spruce and Speciality, with whom we have been doing business with for over 25 years.A cotter pin or a couple of loops of mousing wire through this hole serves the same purpose and secures the shackle in a closed position.