SSUPD Meshlicious Full Mesh Mini-ITX Gehäuse - schwarz

Product Information

Additionally, when a GPU is mounted horizontally and an SFF PSU is fitted, a further bracket can be attached to the SSUPD Meshlicious, which has space for two 3. Great quality keyboard with lots of customization options to make it feel/sound and look exactly how you want it.

A beautifully small vertical chassis, maintaining full-sized GPU compatibility, taking up less than a quarter the space of a traditional tower PC.

A Mini ITX 1200 system using a 10th Generation Intel Core processor based on the latest Comet Lake architecture giving you ultimate performance in a case that is as small as you can get. After all, the Meshlicious gets its name from the fact that three of its sides are all mesh by default. As you can see, the shorter GPU mounting bracket would go here if you move the whole mounting plate over. To start off with, this is by far the smallest case I’ve ever built in, eclipsing some of the more miniscule M-ATX cases on the market like the Silverstone FT-03, or SG10, and the only other ITX case I’ve previously used, the Metallicgear Neo Mini.

Using this method and an SFX power supply there is enough of a gap between the PSU fan and side panel that the PSU would not be starved for air. Yet oddly, over that same period, more and more companies seem to be churning out these compact small form-factor (SFF) chassis. Inside the case, I configured the two 120mm fans for the AIO as intakes, and placed the mesh panel on the graphics card side of the enclosure.In a vertical orientation, there is sufficient clearance for a three-slot 315mm long GPU, allowing any I/O on the graphics card to be accessible via an outlet port on the bottom of the case. Turning off the personalised advertising setting won’t stop you from seeing Etsy ads, but it may make the ads you see less relevant or more repetitive. Not only does this avoid having to use right angle cables that may not even fit if your gpu heatsink is too large, but it also just makes the case feel more like a finished product. Just as small cases like this involve tradeoffs in terms of component support, a mesh-covered case is going to trade some noise for better thermal dissipation. As a result, accessing them much is easier compared to when the I/O is on the bottom, and it looks neater than when they’re mounted to the top.

I did consider cutting and painting an L shaped piece of acrylic to conceal the cables where they are visible around the power supply, but I didn’t think such a mod would be an accurate representation of the case for a review. But for that you’ll need remove the PSU, or install it and connect the cables before installing the power supply. This is excellent for a case of this size, especially as it is not obstructive and does not really require you to make any component-specific compromises. Defined by its dominant mesh framework, Meshlicious delivers unparalleled ventilation for the discerning tech enthusiast. One of the great things about this case is that, despite its vertical orientation, the rear I/O of the motherboard and the GPU output do not exit the top of the tower.I’m very happy to recommend this case to anyone looking for a small footprint build, but not wanting to sacrifice performance. Keep in mind that doing this also minimizes the cooler clearance, which is also quite limited to begin with. Due to the GPU layout which places the PCI-E bracket toward the bottom of the case, you will most likely need to use a display cable with a 90-degree angled connector. Additionally, if you use a graphics card that’s under 211mm in length in a horizontal (rather than vertical) mount, you get space for two 3. The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report.

It is not meant to be compatible with the four-slot setup as there are no short GPUs out there that need that space anyways. storage options on the floor will remain usable no matter what, but as we will see later on, the one underneath the PSU will be a bit hard to reach. Aside from where the cables connect to the PSU, they are only visible where they exit the space to plug into the GPU or motherboard. Each of the four measured components is connected to a REED Instruments SD-947 Data Logging Thermometer with K-Type sensors that have been placed as closely as possible to the benchmarked areas of the CPU, GPU, M.Out of the box, the large mesh panels allow for outstanding airflow, which can be enhanced by installing two 120mm or 140mm fans in the front. You can use the PCIe 3 cable with a PCIe 4 graphics card (with slightly slower performance) if you force your motherboard’s 16x PCIe slot into PCIe 3 mode in its EFI, but make sure you use a card with a full 16x interface, so you don’t lose too much bandwidth by stepping down to PCIe 3. Using stylish Mini ITX cases our systems offer the performance of a tower in a Mini PC using the latest intel technology to ensure you get the performance you need. Depending on your goals, in most situations I would probably recommend going with the full mesh version of this tower, using a 240mm or 280mm AIO to cool your CPU, and positioning the fans as exhaust (pulling air in from the sides and pushing it out the front of the chassis).