Joined in 2023 
82 
63 About this deal
We recommend assessing each DIY job before you make a start to determine whether a DIY scaffold tower is the best access solution for the job. Ground doesn’t need to be pancake flat if you have assorted bits of wood to make it flat – use big bits, a4+ size bits of plywood and joist cut off. He welded up some giant castors to some poles to insert on each leg, so you could move it easily and set the height. I had a DIY version delivered which our joiners refused to open suggesting the cheap versions are rubbish but considering purchasing one of their industrial versions: https://www. As mentioned by others the paint on the coloured bracing bars do chip easily and they were showing a lot of chips and scratches upon opening - to be honest they would probably be like this after a couple of uses so it didn't bother me that much but it suggests careless handling at the packing stages - one of the wing nuts was damaged but a few spares had been thoughtfully included so this was not a problem.
You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. For large scale home DIY jobs like decorating, pruning your trees and washing your windows, a ladder may not always be the best choice. It’s certified to BSEN1004:2004 standards, which tells you that it can be relied upon in a wide range of work environments. Always follow the manufacturer's instructions when erecting scaffold towers, and never deviate from them by using non-standard or jury-rigged parts.Please follow the instructions below, from the web browser manufacturers directly, to configure your browser settings*.
The 7m tower comes in three height sections, so, if you need a smaller tower, no problem, you only need to assemble part of the structure. Many people often assume that scaffold towers are only for outdoor use, and mainly for tradespeople who carry out a lot of construction work, but this is not the case. Founded in 1900, the KRAUSE brand represents the most traditional German access technology brand and stands for superior quality, innovation and safety. There's enough bits now to have a couple of towers on the go at the same time, then you can bridge between them with the thick scaffold boards.For low level stuff they are much safer than a ladder for working at height, say an upstairs window -working for any length of time on a ladder will encourage leaning out too far. The tower takes some time to assemble, especially when you haven't done it before, but it is fairly simple. However I take on board that it might not be the most stable even at 5m and erecting it might be a bit hairy - it might be as bad as being up a ladder. For 7 metres I'd be very unhappy if I was asked to work on a narrow trade platform unless it was anchored into the masonry or it was positioned between two buildings where it couldn't possibly fall over. Update NRW has just sent us this revised version of their original statement: We know our visitor centres are a much-loved resource among locals and visitors from further afield and.
Great Deal 
New Comment