Joined in 2023 
82 
63 About this deal
It also gives more surface area for supports to hold on so the model is less likely to fall during printing. While cleaning my print, I was a little too eager with removing the supports and ended up breaking the hair and chipping the face, but otherwise the quality of the print turned out very good. Even though the port is shaped like a standard USB port, it has a warning next to it that the output voltage is 24 volts instead of the usual 5 volts produced by USB ports, so you wouldn’t want to plug your USB memory stick into it.
After letting the item completely dry, I then cured it and this prevented any white residue from forming on the prints, which can happen even with the water washable resins. Reworking of the UV light system leaves us with a capable 64 UV lights working in perfect tandem thanks to the use of a custom fresnel styled lens system - the same lens technology used for lighthouses. Since the model is printed upside down and is printed used liquid resin, there are additional things you need to take into account such as drainage holes, the weight of the item you are printing so it doesn’t fall off the build plate, and even where the supports attach so that when they are removed, you don’t remove delicate details. You can then tug the levelling card to check you feel resistance whilst still being able to remove the card without excessive force. As consumer resin machines are getting bigger and bigger, there are larger and larger forces at play, and in response, we have created our strongest magnet yet with a power of well over 800 Gauss and it is paired with a thicker Flexi Plate at 0.I oriented with the face pointing away from the build platform so that there would be fewer supports on the face. The rate of laser power drop is related to the frequency of use, working hours, and working environment. Another feature that I’m really happy to see on this model is that the power switch that is on the rear of the Saturn S has now been replaced with a power button on the front of the Saturn 2, making it very convenient to turn on and off. You may consider adding a piece of removed support from a previous print to one corner first to make removal of the mass easier. After removing the resin tank and placing the included levelling card over the screen the machine lowers the printing platform until it triggers a sensor to indicate it is at the end of its travel.
The heat dissipation system includes double heat-conducting copper heat tubes with faster ventilation and heat dissipation.Like many of Elegoo’s other printers, it came packaged in a nesting doll style with the tools packaged inside of a smaller box. Monochrome LCD】 ELEGOO Saturn 2 adopts a 10-inch 8K mono LCD screen with an HD resolution of 7680x4320 and an ultra-fine XY resolution of 28. Additionally, it comes with a set of paper filtering funnels, the power brick, an air purifier module, a user manual, and a USB memory stick with a copy of the manual, Chitubox Basic (the recommended slider for the Elegoo Saturn 2) and some test prints on it. I used an automated alcohol bath which stirs the alcohol into a flurry to wash the parts before moving it into a UV light chamber for a few minutes to accelerate the curing.
After that, I dipped it in water briefly and used the brush included with the water washable resin to loosen up any more resin residue. Using a Fresnel converging lens, the light beams emitted by the 48 built-in LEDs are parallelised, resulting in an extremely uniform exposure at a light wavelength of 405 nm. inch and a 10” large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch.The proven ChiTuBox software allows you to generate high-quality print files in the storage-friendly .
Great Deal 
New Comment