Long-term fungicidal protection, Biostatic effect – Dryzone Mould Sanitiser is a biocidal solution designed to kill mould spores, sterilize the area and prevent regrowth on treated surfaces. As with all remedial damp-proofing systems, it is necessary to remove and replace any salt-contaminated plaster. Dryzone Injection Cream has been successfully tested on porous and neutral pH mortars such as those found in Victorian buildings and is also effective in treating rising damp in rubble-filled walls. In particular the physical properties of the mortar used to construct walls can vary considerably and this can have a significant influence on the effectiveness of any rising damp treatment.

The Dryzone Mould Removal and Prevention Kit contains all the items required to successfully treat and eradicate mould and mildew. Some mention that it works instantly, the smell isn't that bad, and it makes the air fresh, while others say that the smell can be a little bit intense. For information on damp-proofing other types of walls, such as random stone walls, consult our guide to “Rising Damp and its Control,” available from our brochure download page. The Dryzone Mould Removal and Prevention Kit is part of the range of condensation products within the Dryzone System.Drill holes at 120mm centres along the mortar course of the walled to be damp-proofed using a 12mm drill-bit.

Launched in 2000, Dryzone Damp-Proofing Cream has caused a revolution in the treatment of rising damp. Laboratory and field testing has also shown that Dryzone outperforms creams by competing manufacturers in walls with either low or high levels of moisture saturation. Lead times are shown on the product and trolley pages and are always advertised in working days (Monday to Friday). It was faster to install, less messy, and provided a more reliable barrier to rising damp than conventional damp-proofing systems.The Dryzone System offers a complete solution allowing the user to solve the problem of rising damp from start to finish. The Dryzone cream is introduced by means of a simple applicator gun into a series of holes drilled into the mortar course.

The dual-action system uses Dryzone Mould Eliminator to shift mould and mildew before application of Dryzone 100 Mould Sanitiser to limit mould regrowth.We strongly recommend that you contact us directly for further help and guidance on all aspects of our products and services. Dryzone DPC cream is injected by means of a simple applicator gun into a series of holes drilled into the mortar course. Performance of DPC creams vary depending on a number of factors like: mortar type, moisture content, pore structure but most of all, formulation and strength.