This is what I’ve added beyond turning on the majority of the dawn features (I don’t think the broadcast command does anything): I applied the CPU frequency patch, but at the first glance it looks the system is not quite happy about it as there are new warnings in the kernel log. The processor started at 384 MHz, so it seems to work ok in principle. The CPU frequency scales up and down according to the load quite normally. Everything after Feb2016 is not in 4.4, about 10 commits in total. I looked at the commit list and one patch especially looks interesting as it promises to fix a major performance issue in dual-core processors (like ipq8065 in R7800). cpu cpu1: _opp_add: duplicate OPPs detected. Existing: freq: 1400000000, volt: 1075000, enabled: 1. New: freq: 1400000000, volt: 1075000, enabled: 1

To answer the question by @Tusc in Build for Netgear R7800 I ran the OpenSSL benchmarks with my LEDE 17.01 release branch build: The 'numbers' are in 1000s of bytes per second processed. Flash layout in 18.06.0-rc2 and later. Since 18.06 Openwrt reserves 4 MB for kernel. ubi contains rootfs (/rom) and rootfs_data (/overlay)

Log in

In fact, it’s actually some of the router’s other features that help legitimise the Netgear Nighthawk X4S’s expense in reality. sysinit: /etc/rc.common: eval: 1: cannot create /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq: Directory nonexistent tc qdisc add dev nssifb parent 1: handle 10: nssfq_codel limit 10240 flows 1024 quantum 1514 target 5ms interval 100ms set_default

https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.8.y&id=a9efad8b24bd22616f6c749a6c029957dc76542b Linux version 4.19.101 (zenotec@hornet) (gcc version 8.3.0 (OpenWrt GCC 8.3.0 r12237-d2b8ccb1c0)) #0 SMP Sun Feb 16 14:36:29 2020 The key appeal of the D7800 version of the X4S is that is includes a DSL modem. As far as modems go, the Nighthawk X4S offers great future-proofing. It supports the VDSL2 standard as well as VDSL, ADSL, ASDSL2, and ADSL2. If you do want to use an alternative modem, or other Internet source, then there is still a fifth Ethernet port that can be used instead of the phone input. Would I lose this functionality after flashing with DD-WRT? If yes then is there any working DD-WRT alternative for accessing a connected USB drive from the internet? ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.

Advice on opening Netgear R7800 case and using the serial console

The Netgear Nighthawk X4S is one of the highest-spec routers available, with quoted bandwidth of AC2600. That’s 1,733Mbps from its 5GHz band and 800Mbps from the lower performance, higher range (and compatibility) 2.4GHz one. QoS enables the Netgear Nighthawk X4S to manage bandwidth, prioritising services – such as Netflix, for example – that require a reliable, constant stream. The newest commit removed the "workaround" to use wifi & wps button LEDs for wifi 2G/5G status indication. You might want to try to upload firmware to your router via TFTP if you are experiencing any of the following symptoms: If you can install a program on your Windows laptop you can install the OVPN client but you probably need admin rights.

If your router does have a companion smartphone Netgear app, then please do poke around in that and find out where to update the router's firmware. UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID EED824E3-31C4-4ED8-AD98-66D7AC3E2706, small LPT model sysinit: IE: IEEE 8[wifi0] FWLOG: [184866] WAL channel change freq=5765, mode=10 flags=0 rx_ok=1 tx_ok=1I have not verified that there is similar "use real world randomness" patch also for ath10k, but I suppose that there is one... ( @nbd likely knows that best)

To test 160 MHz mode operation, I asked NETGEAR to supply a device supporting 160 MHz mode. These are apparently hard to come by because NETGEAR shipped a second R7800 router and special firmware to make it operate as a 2×2 device. Appreciate developer support to fix bugs and maximize the potential of ipq806x with NSS hardware offloading support. tc qdisc add dev eth0 parent 1: handle 10: nssfq_codel limit 10240 flows 1024 quantum 1514 target 5ms interval 100ms set_default We wish this was an easier process. Router updates are one of the most critical things you can do to keep your computers, smartphones, gaming consoles, smart-home devices and personal information safe. Someday all router makers will understand that. All Netgear home networking devices that need to install the March 2020 firmware updates

Switches

We need to use a pointed object such as a pen or a paper clip to press and hold the Restore Factory Settings button, located on the bottom of the router, for over five seconds until the Power LED blinks amber. Also; distribute the documentation as a PDF as a lot of people tend not to have a word processor compatible with Microsoft Word and would simply not trust .doc or .docx files ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1 cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 384000000, volt: 875000, enabled: 1. New: freq: 384000000, volt: 875000, enabled: 1