Who does not love to rely on the carburetor unit to boost the performance of the engine? This 26mm carb unit should bring satisfaction in every scenario to keep the users happy. Jet. Pilot. VM26, Mikuni, Molkt and Dirtmax, 15.0 to 37.5 for VM26 Mikuni & Dirtmax/Molk Carbs. 15.0 to 37.5 in increments of 2.5 Who should grab this one? Well, the Nibbi 26mm carburetor does not remain with those units that require only a simple bolt-on installation without any sort of modifications. If you are someone who would love to get the best experience by modifying or customizing the tuneability in a different setting, this one is a must-have item.

Last but not the least, this one is compatible with a large number of Powersports. Therefore, you will always have the authenticity to use it in multiple applications. Once you install this carburetor to your pit bike, you will notice a dramatic improvement to the choke and throttle control capacity. Besides, getting the optimum amount of throttle response will be easier than ever before. These are not the least things you can expect to get from this item. Carburetors usually do not come for a single specific model. Either it is compatible with a particular series or it is compatible with a large number of specific vehicles. But if it does not have the same functional diameter as your engine’s intake pipe has, ensuring high-end compatibility will never be possible. Therefore, giving good concentration on compatibility is always important. This carburetor kit will always impress you not only because of its cheaper price range but also because of its high-end quality and performance.If you are happy with the way your bike is running, but want to increase performance by buying a bigger carb then simply go to the next size up on the list (E.g. 125cc engine would be upgraded to a 24mm carb) generally speaking if you are using a bigger carb for the engine it will be harder to dial in. If you are not familiar with which jets are which and where the needle jet is etc then see Johnr6's how-to guide “How to service the carb and change the jets”. Before attempting to tune your carb you should always clean your carb, air filter, add fresh fuel and buy a jet kit (It is recommended by some companys to use genuine brand jets even if you are using copy carbs as the quality of the jets is very important and universal sizes are needed) We are not here to make any justification regarding whether this one is a real Mikuni Carburetor or not. But one thing we can tell you is that this 22mm carburetor from Co-riding is one of those items that can deliver a discernable change of performance after the installation. Would you believe that the color scheme of a carburetor can also influence a user to go for it? Well, we have found many pieces of evidence with this one. Nibbi 26mm carb seems to have a very stylish color scheme to influence any user to go for it. But the color is not the only factor we love about this 26mm carburetor. The Nibbi carb has some flourishing features to get a high-performing racing experience from his pit bike. When you compare this Mikuni carburetor to the previous one, the price may seem a little higher. But the price should not baffle you with your decision because this one is simply a great item to have for enhancing the bike’s performance.

TC-Motor has brought this mid-range carburetor kit for the most powerful Chinese dirt and pit bike engines. This one is a 26mm carburetor that should fit with most 140cc, 150cc, and 160cc engines. The kit also includes an air filterto enhance the performance capacity of your pit bike to a better degree. We are recommending this item at the end should not mean this one does not have enough quality. Almost 70% of the users loved this item as a great carburetor unit for their pit bike, around 15% said it to be good except for some nominal issues. How about getting a more racing vibe from your pit bike engine ? If that is your concern, this one from Nibbi has been satisfying the users for a long time. I have a Virago 535 2002 with popping from front cylinder, Bike has Highway Hawk Fat Pipes ( think they are highway hawk, no marking on them) the exhaust had very small baffles in which I have replaced with 8inch baffles and baffle wrap ( makes chuffing sound now instead of loud bang) apparently the previous owner had a Dyna jet carb kit fitted at same time, carb sync looks near enough, neither mixture screw has much effect, front is 3 turns out and rear is 2 2/3 out popping seems to ease a little if front mixture screw screwed in until it is 1 1/5 turns out but neither effect engine revs, when the front mixture screw is fully seated with engine running then loosen it engine revs rise slightly but only momentarily then even out again. spark plugs good colour not sooted up or white. thought I had a vacuume leak sprayed carb cleaner on rubber carb mount to engine on front cylinder, engine revs rise dramatically,, stripped it down twice now and reseated/sealed all I could,, I`m now at a bit of a loss as to what to try next.any suggestions.With all the changes, the bike transformed in attitude…great throttle response, and it just sounds mean!… Only thing is, I’d like to get it dialed in nice. It’s a little over poppy on the decel…( I expect some ) and the fuel mixture screw can be all the way seated and it doesn’t slow down idle. Better functionality, adjustment capacity, and tuning properties make this one a perfect item every user will love to have. P.S whilst syncing the carbs I turned ( unscrewed ) the adjuster screw right out and the engine revs increased dramatically,, is this normal ?. For the 100hp model – 128 main and 42 pilot) This means that carb 4 is correctly jetted but not working. Minor adjustments to the idle screw should make any user comfortable with the throttle response. Therefore, getting a high-end rpm rate will be much easier than ever before.