This method involves using the hairdryer to heat up the glue underneath the mouse feet. Once the glue has been heated long enough, use a spudger (a flat plastic tool with a sharp end) or a knife to scrape underneath the feet to peel them off — be careful if using a knife! The 60% layout was considered a niche outside layout until this keyboard hit the market. So, what about this keyboard is special? PBT Doubleshot Keycaps The debounce time refers to how long the keyboard waits before sending another signal. Mechanical keyboards typically have a debounce time of 10ms, but your able to drop it down to 5ms if you choose to do so.

Before applying the grip tape, it is essential to clean your mouse to remove any dirt or oils that may interfere with the grip tape's adhesion. Use a soft cloth and rubbing alcohol to gently clean the surface of your mouse, taking care not to damage the coating. Make sure to remove all the dirt and oil residues, especially around the edges of your mouse.If you want to roll your sleeves up a bit, you can consider lubing the stabilizers to reduce the friction and rattle. It’s a fantastic little keyboard. The 65% form-factor is a great tradeoff between 60% and TKL. It’s about as small as most people can go without any difficulties of adjusting to life without arrow-keys. The board itself is very pretty, I'm honestly really impressed by the look and feel of it. I do wish I had bought one that had a separate row for the F1 keys (maybe even the number pad, but hey maybe future me will be another!), so it's been a bit weird to get to used to. When lit up this board is gorgeous. I use the twinkle? led setting. It's very dim and glowy, kinda magical really. :)

This is a killer first mechanical keyboard. I love it, but there is 2 major flaws. I don't want to give it a 3 star because it may just be my board, but even then I am still satisfied.

You may also like…

With a little preparation and some simple steps, you can enjoy better control and performance like the pros. While many would consider this a bad thing, hot-swappable keyboards typically don’t last as long as soldered keyboards. If you’re a fan of RGB lighting, you can cycle through the different preset options and even customize your own options. The logo and model name are printed on the front side of the keyboard in a unique way that compliments the rest of the design. Finally, once the grip tape is properly applied, use a sharp hobby knife or scissors to trim any excess grip tape from around the edges of your mouse. Trimming the edges gives your mouse a clean and finished look.