Key Specs – Paint base: Oil and water hybrid; Approx. coverage: 10-12m 2per litre; Touch-dry time: 1-2 hours; Recoat time: 4-6 hours; Other colours available: Yes Eggshell paints are closer in sheen to satinwood, but are a little more matte. Again, these are better suited to walls and ceilings as they aren’t as durable as satinwood. What do I need to consider when choosing a satinwood paint?

For such a great paint, it’s disappointing that it doesn’t come in any colours other than the standard pure brilliant white. But the elegant, soft mid-sheen and almost velvety-looking finish make it perfect for any home. It’s oil-based, so brushes will need to be cleaned with brush cleaner, and as with all oil-based paints, you should also make sure you keep the area well ventilated while painting and drying. After it’s fully dry, any future scuff marks or stains can be cleaned off without damaging the paint, making it perfect for high-traffic areas. A hybrid is a compromise on just about every issue I have just mentioned. The paint will yellow, but it’ll stay white a lot longer than an oil-based. It is more durable than water-based, but not as durable as oil. It is easier to control than water, but not as easy as oil. The list goes on!! Perhaps the best feature of the Aqua Satin range, though, is the incredibly wide variety of colours. While there’s an impressive range of neutrals and pastels, you can also find this satinwood paint in everything from rich, dark reds to bold, bright blues, making it perfect for those looking to create a unique and vibrant space. Gloss paints have been the go-to for windows, doors and skirting boards due to their robust nature and ability to be wiped clean, but are falling in popularity because of the dated finish and tendency to yellow over time.

Filters

Tough, Durable, Water-Based Paints ​The Johnstone's Trade Aqua System range offers you a high-quality alternative to traditional solvent-based products. It can be applied with either a paint brush or a foam roller, and getting a smooth surface with no streaks or drips is easy, even for beginners. Although it should always be applied in a well-ventilated area, it has a much weaker odour than other oil-based satinwood paints. A lot of decorators who try Johnstone’s Aqua for the first time do not get on with it. This isn’t down to the paint being poor quality, but more to do with the decorator not knowing how to apply the product correctly. Satinwood paint has risen in popularity over the last few years. Its medium-sheen gives a more contemporary look to doors, windows and skirting boards than traditional gloss paint. Most satinwood paints are also a great choice if you’re looking to paint a radiator or any exposed metal pipework, and can even be used on kitchen and bathroom walls. You don't need to worry about yellowing or ageing. Each product leaves you with a durable finish, ensuring surfaces stay whiter for longer.

The normal procedure would be one coat of undercoat followed by two topcoats, whether going over previously painted or pre-primed. Three coat systems over previously painted surfaces are the norm for most water-based paints. There are a few products out there which only need two. Each product gives you the application and feel of a solvent-based product, whilst delivering the benefits of a water-based product. Ultimatly you'll be rewarded with a superior finish you can be proud of, every time.Key Specs – Paint base: Water; Approx. coverage: 12m 2per litre; Touch-dry time: 2 hours; Recoat time: 6 hours; Other colours available: Yes, a wide range The best satinwood paint you can buy in 2023 1. Crown Solo One Coat Satin Paint: The best one coat satinwood paint All surfaces to be painted should be clean, dry and free from all loose and flaking material. Prime bare wood surfaces with Johnstone’s Aqua Water Based Undercoat. Prime all other bare surfaces with an appropriate primer and rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly. As for the roller. I like the Hamilton ‘For the Trade’ mini-roller. They hold loads of paint, will stand up well to use in Johnstone’s Aqua, and are reasonably priced. Available online here. A water-based paint is not as durable, opacity isn’t as good meaning extra coats are needed, it is harder to control when applying and you normally encounter brush marks.

We also deliver to the majority of non mainland UK locations including The scottish Highlands & islands, Isle of Man, Isle of Wight, Isles of Scilly and Northern Ireland. Please see full delivery terms for the extra charges associated with these locations Our range can be tinited to 16,000 colours, offering you the flexibility to finda paint that perfectly fits a desired colour scheme or specialist project. Key Specs – Paint base: Water; Approx. coverage: 16m 2per litre; Touch-dry time: 1-2 hours; Recoat time: 6 hours; Other colours available: Yes Satinwood paints can either be oil- or water-based. While both can be used for most jobs, it’s always worth reading the tin to make sure the paint you’ve chosen is suitable for what you have in mind. Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days.

Whether you’re touching up the skirting boards or planning a big interior redesign, finding the best satinwood paint for your specific project is key. And while you’d be forgiven for not spotting the difference between the various brands of mid-sheen white, choosing the right paint will make the painting process and end result that much better. It’s hard-wearing, easy to clean and usually very straightforward to use. While it’s most commonly found in only one or two shades of white, some brands offer a wider range of colours, giving you the option to truly personalise your space. Another point is washing your brush after the job. Remember Johnstone’s Aqua satin and gloss products do contain a small amount of oil, so water alone will not be enough to clean out of your paintbrush. Clean Spirit is designed to clean hybrid paints so that is your best option, but virosol will also work. In fact, white spirit will do the job too. Clean what paint you can from the brush using clean or soapy water, then use one of the three products I’ve just mentioned to finish the job off, dead easy!! Besides which, the Johnstone’s Aqua undercoat is brilliant!! Easy to apply, dries flat and has great opacity. It is one of the best “nearly water-based” undercoats on the market.